Minor 500 Option - DELTA DORE CALYBOX 110 User Manual

Programming
Check your program
Press the button repeatedly to check the accuracy
of the Comfort and Economy periods you created.
Time slot
consulted
Program
profile
Programming zone 2
The programming for zone 2 is available after pressing
(OK) of the day 7 of the zone 1
Exiting the programming mode
Turn the knob to another mode
COMMENTS: Depending on the configuration made
during installation, programming can be weekly or
daily. Likewise, this programming may be done in
increments of one hour, 30 minutes, or 15 minutes. To
change these settings, refer to the "installation guide",
or contact our customer service department or your
installer.
Verification of the
different
periods
(on the CALYBOX 120)
- 18 -
MINOR 500 option: set point settings
This mode is used to modify the Comfort and Economy set
points of each probe. Turn the knob to .
or
Repeat the operations for each probe.
When the last probe is set, you can set the Frost
Protection set point for all the zones.
To exit the mode, turn the knob to another mode.
Setting (5 to 30°C) of the Comfort
point (19°C by default) for the probe 1 of
zone 1.
Confirm and go to the next setting.
Setting (5 to 30°C) of the Economy
point (16°C by default) for the probe 1 of
zone 1.
Confirm and go to the set point settings
for the next probe.
Setting (5 to 15°C) of the Frost Protection
set point (8°C by default) for all the zones.
Confirm the modification
- 19 -
set
set