Download  Print this page

Connecting The Power Terminal - Pioneer GM-X942 Owner's Manual

Bridgeable power amplifier
Hide thumbs

Advertisement

Table of Contents
Connecting the Unit

Connecting the Power Terminal

• Always use the special red battery and ground
wire [RD-223], which is sold separately. Connect
the battery wire directly to the car battery positive
terminal (+) and the ground wire to the car body.
1. Pass the battery wire from the
engine compartment to the interior
of the vehicle.
• After making all other connections to the
amplifier, connect the battery wire terminal
of the amplifier to the positive (+) terminal of
the battery.
Fuse (30 A)
Fuse (30 A)
Positive terminal
Insert the O-ring rubber
grommet into the vehicle
body.
2. Twist the battery wire, ground wire
and system remote control wire.
7
Engine
Interior of
compart-
the vehicle
ment
Drill a 14 mm
hole into the
vehicle body.
Twist
3. Attach lugs to wire ends. Lugs not
supplied.
• Use pliers, etc., to crimp lugs to wires.
Lug
Battery wire
4. Connect the wires to the terminal.
• Fix the wires securely with the terminal
screws.
GND terminal
Power terminal
Battery wire
Lug
Ground wire
System remote
control terminal
System remote
control wire
Ground wire

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Pioneer GM-X942

  Related Manuals for Pioneer GM-X942

This manual is also suitable for:

Gm-x742