( __ c_o_n_n_e_d_i_ng_th_e_u_n_it_s _ _ )
G) RCA input jack A
For two-channel output, connect the RCA
plugs to the RCA input jack
Connecting wire with RCA pin plugs (sold se-
@ From car stereo (RCA output)
(input select) switch
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire with RCA pin cord.
G) Car Stereo
@ Red: Right(±)
@ Black: Right 8
Speaker input wire with RCA pin cord
To the RCA input jack of this unit
_ _ _ _ _ _
If speaker input wires from a headunit are
connected to this amplifier, the amplifier will
automatically turn on when the headunit is
turned on. When the headunit is turned off,
the amplifier turns off automatically. This
function may not work with some headunits.
In such cases, please use a system remote
control wire (sold separately). If multiple am-
plifiers are to be connected together synchro-
nously, connect the head unit and all
amplifiers via the system remote control wire.
Connect the system remote control wire when
you wish to only turn on the car stereo, not the
This amplifier automatically selects an input
signal mode between the RCA level and the
speaker level by detecting an input signal.
Since the wire will become loose over time,
it must be periodically inspected and tigh-
tened as necessary.
Do not solder or bind the ends of the
Fasten while making sure to not to clamp
the insulating sheath of the wire.
Use the supplied hexagonal wrench to
tighten and loosen the terminal screw of
the amplifier and use it to securely fasten
the wire. Be careful to avoid excessive tigh-
tening of this screw, which may damage
Connecting the power terminal
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including