Download  Print this page

Pioneer GM-X962 Owner's Manual

Bridgeable power amplifier
Hide thumbs

Advertisement

BRIDGEABLE POWER AMPLIFIER
AMPLIFICATEUR DE PUISSANCE
PONTABLE
Owner's Manual
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: (905) 479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo 1009 3er. Piso Desp. 302
Col. Del Valle Mexico, D.F. C.P. 03100
TEL: 5-688-52-90
<KYMFX/01J00000>
GM-X962
GM-X862
Mode d'emploi
Published by Pioneer Corporation.
Copyright © 2001 by Pioneer Corporation.
All rights reserved.
Publication de Pioneer Corporation.
Copyright © 2001 Pioneer Corporation.
Tous droits de reproduction et de traduction
réservés.
Printed in U.S.A.
Imprimé aux Etats-Unis
<HRD0186-A> UC

Advertisement

loading

  Also See for Pioneer GM-X962

  Related Manuals for Pioneer GM-X962

  Summary of Contents for Pioneer GM-X962

  • Page 1 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada Copyright © 2001 by Pioneer Corporation. TEL: (905) 479-4411 All rights reserved. PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Publication de Pioneer Corporation. San Lorenzo 1009 3er. Piso Desp. 302 Copyright © 2001 Pioneer Corporation.
  • Page 2 Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
  • Page 3: Before Using This Product

    Thank you for purchasing this PIONEER Composition of Manual product. It is designed to give you many years of enjoyment. This manual applies to the GM-X962 and PIONEER SUGGESTS USING A PRO- GM-X862. However, the illustrations show FESSIONAL INSTALLER DUE TO THE the GM-X962.
  • Page 4: Setting The Unit

    • When using with an RCA equipped car stereo (standard output of 500 mV), set to the NORMAL position. When using with an RCA equipped Pioneer car stereo with max. output of 4 V or more, adjust level to match the car stereo output level.
  • Page 5: Connecting The Unit

    Installation rest or idling. manuals of both products and connect cords that have the same function. GM-X962 Speaker Channel Speaker Type Power Subwoofer Nominal input: Min.
  • Page 6: Connection Diagram

    External Output Front side RCA input jack Back side × 2 GM-X962: Fuse (25 A) GM-X862: Fuse (25 A) × 2 Speaker terminal System remote control wire (sold separately) See the “Connecting the Connect the male terminal of this wire to the system remote control Speaker wires”...
  • Page 7: Connecting The Power Terminal

    Connecting the Unit Connecting the Power Terminal 4. Connect the wires to the terminal. • Fix the wires securely with the terminal • Always use the special red battery and ground screws. wire [RD-223], which is sold separately. Connect the battery wire directly to the car battery positive GND terminal terminal (+) and the ground wire to the car body.
  • Page 8: Connecting The Speaker Terminals

    Connecting the Speaker Terminals 4. Push on the terminal cover. 1. Expose the end of the speaker wires using nippers or a cutter by about 10 mm (3/8 inch) and twist. Twist 10 mm (3/8 inch) 2. Attach lugs to speaker wire ends. Lugs not supplied.
  • Page 9: Connecting The Speaker Wires

    Connecting the Speaker wires Three-channel mode, two-way system The speaker output mode can be two-chan- nel (stereo), one-channel (mono), or three- channel (stereo + mono). Connect the speaker leads to suit the mode according to the figures shown below. Mid-high (Right) Two-channel mode (stereo) Woofer (Mono) Mid-high (Left)
  • Page 10: Component Guide

    Setting the Filter Constant Low-pass filter (for subwoofer/woofer): Band-pass filter (combination of low-pass 6 dB/octave filter and high-pass filter for mid- bass/mid): 6 dB/octave –6dB –6dB High-pass filter (for mid/mid-high): 6 dB/octave • A multi-channel system can be set up using a combination of filters.
  • Page 11: Example Of Installation On The Floor Mat Or On The Chassis

    Installation CAUTION Example of installation on the floor • Do not install in: mat or on the chassis —Places where it could injure the driver or pas- sengers if the vehicle stops suddenly. —Places where it may interfere with the driver, 1.
  • Page 12: Specifications

    Specifications GM-X962 Power source ......................14.4 V DC (10.8 — 15.1 V allowable) Grounding system ............................Negative type Current consumption ......................25.0 A (at continuous power, 4 Ω) Average current drawn* ......................9.6 A (4 Ω for two channels) 17.3 A (4 Ω for one channel) Fuse ..................................
  • Page 13: Average Current Drawn

    GM-X862 Power source ......................14.4 V DC (10.8 — 15.1 V allowable) Grounding system ............................Negative type Current consumption ......................25.0 A (at continuous power, 4 Ω) Average current drawn* ......................9.6 A (4 Ω for two channels) 17.3 A (4 Ω for one channel) Fuse ..................................

This manual is also suitable for:

Gm-x862