Table of Contents
Advertisement
Setting and using the oven programmer/timer
Switching on the appliance
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
must set the time of day.
o Press the ON / OFF button (3) to turn the oven on. A sound will
be heard and the timer display will show "ON". The bulb symbol
lights on the display and the internal oven light turns on.
Setting the time of day
After setting your oven for manual operation, you should also
set the time of day.
o Press the cooking time button (5) and the end of cooking time
button (6) simultaneously. The two dots on the timer display
(12) will flash.
o Within 3 seconds of releasing the buttons, use the timer plus (8)
and minus (7) buttons until the correct hour is selected.
o Once you have released either the plus or minus buttons, after 3
seconds the two dots on the timer display will stop flashing and
the time of day will be set.
IMPORTANT: When the oven is switched off, the clock's
luminous intensity decreases. By touching any key, the clock
returns to maximum luminosity for 60 seconds.
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select the fan oven
function and set the thermostat to its maximum temperature
setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
11
Advertisement
Table of Contents
