Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb - Yamaha BANSHEE YFZ350 Owner's Manual

1
1. Headlight bulb holder cover
2. Headlight bulb holder
3. Headlight unit
ECB00680
CAUTION:
Make sure the bulb holder cover is securely fit-
ted over the bulb holder and seated against the
reflector.
7. Place the headlight unit in the original posi-
tion, and then install the screw.
8. Adjust the headlight beam if necessary.
EBU25550

Adjusting a headlight beam

ECB00690
2
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the adjusting
screw in direction (a).
To lower a headlight beam, turn the adjusting
3
screw in direction (b).
1. Headlight beam adjusting screw
EBU25610

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
8-48
CAUTION:
(a)
1
(b)
1
2
3
4
5
6
7
8
9
10
11