Troubleshooting - Yamaha BANSHEE YFZ350 Owner's Manual

Tightening torques:
1
Front wheel nut:
2 45 Nm (4.5 m·kgf, 32 ft·lbf)
Rear wheel nut:
3
45 Nm (4.5 m·kgf, 32 ft·lbf)
4
EBU25740

Troubleshooting

5
Although Yamaha ATVs receive a thorough in-
spection before shipment from the factory, trouble
6
may occur during operation. Any problem in the fu-
el, compression, or ignition systems, for example,
7
can cause poor starting and loss of power.
The following troubleshooting charts represent
8
quick and easy procedures for checking these vital
systems yourself. However, should your ATV re-
9
quire any repair, take it to a Yamaha dealer, whose
skilled technicians have the necessary tools, expe-
10
rience, and know-how to service the ATV properly.
Use only genuine Yamaha replacement parts. Im-
11
itation parts may look like Yamaha parts, but they
are often inferior, have a shorter service life and
can lead to expensive repair bills.
EWB02280
WARNING
Do not smoke when checking the fuel system.
Fuel can ignite or explode, causing severe inju-
ry or property damage. Make sure there are no
open flames or sparks in the area, including pi-
lot lights from water heaters or furnaces.
8-51