Checking The Brake Pedal Position - Yamaha BANSHEE YFZ350 Owner's Manual

intervals specified in the periodic maintenance and
lubrication chart. The brake lever should have a
1
free play of zero mm (zero in) as shown. If the free
play is incorrect, have a Yamaha dealer check the
2
brake system.
3
4
5
6
7
8
1. Brake lever free play
9
EWB02070
10
WARNING
Operating with improperly serviced or adjust-
11
ed brakes could cause loss of braking ability,
which could lead to an accident.
After servicing:
G Make sure the brakes operate smoothly and
that the free play is correct.
G
Make sure the brakes do not drag.
G
Make sure the brakes are not spongy. All air
must be bled from the brake system.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
1
EBU24611

Checking the brake pedal position

The brake pedal position must be checked and, if
necessary, adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
The top of the brake pedal should be positioned
10.0 mm (0.39 in) below the top of the footrest as
shown. If the brake pedal is not positioned as spec-
ified, have a Yamaha dealer adjust it.
8-35