Yamaha BANSHEE YFZ350 Owner's Manual page 66

used to allow the ATV to make turns quickly and
easily. It is essential that this skill be learned first at
1
low speed.
EWB01570
2
WARNING
Always follow proper procedures for turning
3
as described in this Owner's Manual. Practice
turning at low speeds before attempting to turn
4
at faster speeds. Do not turn at speeds too fast
for your skills or the conditions.
5
As you approach a curve, slow down and begin to
6
turn the handlebars in the desired direction. As you
do so, put your weight on the footboard to the out-
7
side of the turn (opposite your desired direction)
and lean your upper body into the turn. Use the
8
throttle to maintain an even speed through the
turn. This maneuver will let the wheel on the inside
9
of the turn slip slightly, allowing the ATV to make
the turn properly.
10
11
1
1. Lean towards inside of turn.
2. Support your weight on the outer footrest.
This procedure should be practiced at slow speed
many times in a large unpaved area with no obsta-
cles. If an incorrect technique is used, your ATV
may continue to go straight. If the ATV doesn't
turn, come to a stop and then practice the proce-
dure again. If the riding surface is slippery or loose,
it may help to position more of your weight over the
front wheels by moving forward on the seat.
Once you have learned this technique, you should
be able to perform it at higher speeds or in tighter
curves.
Improper riding procedures such as abrupt throttle
7-13
2