Operation; Starting A Cold Engine - Yamaha BANSHEE YFZ350 Owner's Manual

EBU19880
1
EBU19900
2
Read the Owner's Manual carefully before riding
the ATV.
3
EWB00630
WARNING
4
Read the Owner's Manual carefully to become
5
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
6
accident or injury. If there is a control or func-
tion you do not understand, ask your Yamaha
7
dealer.
8
EBU20281

Starting a cold engine

9
EWB00640
WARNING
10
Always make sure all control cables work
smoothly before you begin riding in cold
11
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.

OPERATION

ECB00150
CAUTION:
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
1. Set the parking brake.
2. Turn the fuel cock to "ON".
3. Turn the main switch to "ON" and the engine
stop switch to "RUN".
4. Shift the transmission into neutral.
5. Use the starter (choke) in reference to the fig-
ure:
Position (1):
G
Cold engine start with ambient temperature be-
low 5 °C (40 °F).
Position (2):
G
Cold engine start with ambient temperature be-
tween 0 °C (30 °F) and 30 °C (90 °F).
Position (3):
G
Cold engine start with ambient temperature
above 25 °C (80 °F).
6-1