Table of Contents
Advertisement
Auto Channel
Auto Channel
Range
Auto Channel
Interval
Channel
Bandwidth
BSS Basic Rate
Set
When auto channel is disabled, select a wireless channel manually:
Object
Channel Interval
Channel
Bandwidth
BSS Basic Rate Set Set a Basic Service Set (BSS) rate: this is the transmission rate for
Enable/disable auto channel selection.
Auto channel selection will automatically set the wireless channel for the
access point's 2.4GHz frequency based on availability and potential
interference.
When disabled, select a channel manually as shown in the next table.
Select a range from which the auto channel setting (above) will choose a
channel.
Specify a frequency for how often the auto channel setting will
check/reassign the wireless channel.
Check/uncheck the "Change channel even if clients are connected" box
according to your preference.
Set the channel bandwidth:
20MHz (lower performance but less interference)
40MHz (higher performance but potentially higher interference)
Auto (automatically select based on interference level).
Set a Basic Service Set (BSS) rate: this is the transmission rate for
controlling communication frames for wireless clients.
Description
Select a wireless channel from 1 – 11.
Set the channel bandwidth:
20MHz (lower performance but less interference),
40MHz (higher performance but potentially higher interference)
Auto (automatically select based on interference level).
controlling communication frames for wireless clients.
-34-
User Manual of WDAP-1750AC
Advertisement
Table of Contents
