Entering Adjustment Mode - Icom IC-E7 Service Manual

Hide thumbs Also See for IC-E7:

¤ ENTERING ADJUSTMENT MODE

q Turn the power OFF.

w Connect the JIG cable (see page 5-1) to the [MIC/SP] jack.

e Turn the "S1" of the JIG cable ON.

r While pushing [FUNC], [BAND] and [Y] key, turn the

power ON.

t Turn the "S1" of the JIG cable OFF, then start the adjust

ment.

During adjustment mode, the function dispaly shows the ad-

justment item, frequency, etc. as below.

fineline6

¤ KEY ASSIGNMENTS FOR ADJUSTMENT MODE

•

: Selects the next adjustment item.

•

: Selects the previous adjustment item.

•

[DIAL]

: Adjusts the value for the item manually.

•

: Adjusts the value for the item automatically.

•

: Stores the set value.

NOTE: The set value storing is inhibited

¤ QUITING ADJUSTMENT MODE

• Turn the power OFF.

5 - 2

during transmit. Release PTT

switch to return to receive first,

then push this key to store the

set value.

Table of Contents