Part 3: Installation And Preparation For Use - Nordmende CTEC50WH Operating And Installation Instructions

PART 3: INSTALLATION AND PREPARATION FOR USE

This modern, functional and practical cooker that is manufactured with the most
quality parts and materials will meet your needs in every respect. You must surely
read this manual in order not to have any problem in future and to be able to have
successful results. The following information is the required rules for right
installation and service processes. It must be read especially by the technician who
will install the product.
CONTACT THE AUTHORIZED SERVICE FOR INSTALLATION OF YOUR COOKER!
3.1. INSTALLATION OF COOKER
There are some factors that must be paid attention to while installing your cooker.
Surely pay attention to the below suggestions in order to be able to prevent any
problems and/or dangerous situations that may occur later.
It can be placed close to other furniture on condition that in the area where the
cooker is set up, the furniture's height must not exceed the height of the cooker.
Pay attention not to place it near the refrigerator, there must be no flammable or in
flammable materials such as curtain, waterproof cloth etc. that will begin to burn
quickly, while choosing the place for cooker.
It is required there must be at least 2 cm blank space between the back cover of
cooker and wall for air circulation.
The furniture close to cooker must be manufactured resistant to heat more than
50 C° of the room temperature.
The cooker is designed to fit between kitchen cabinets spaced over 500 mm
apart. The space either side of the cooker need only be sufficient to allow
withdrawal of the cooker for servicing. It can be used with cabinets on one side or
both sides as well as in a corner setting. It can also be used free-standing.
5