Safety Information; Battery Glossary; Nickel Cadmium Batteries (Nc) - Multiplex Power Peak B6 EQ-BID Operation Instructions Manual

13.

SAFETY INFORMATION

good insulation to prevent the risk of electric shock.
place the charger and connected batteries on combustible surfaces. Never use
the charger close to combustible materials or gases.
Do not leave the charger unattended during operation. The charger can heat up consi-
derably during normal operation.
® B6 EQ-BID is designed only for charging, discharging and equalizing
rechargeable NC/NiMH/lead and lithium batteries. Due to the risk of explosion, do not
use the charger to charge dry batteries.
ply unit, therefore, never operate the charger with a different voltage rating.
sunlight.
and disconnect any batteries.
ambient temperature.
geable battery pack at a time.
Always take great care to check the settings on the Power Peak ® B6 EQ-BID.
Unsuitable settings can irreparably damage the batteries.
14.

BATTERY GLOSSARY

To prevent injury to persons and damage to property, certain preventative measures
must be taken into account when working with batteries. You bear the responsibility
whe using these batteries.

14.1 NICKEL CADMIUM BATTERIES (NC)

We recommend the following charging rates for NC batteries:
High energy batteries, 1-2C, pay attention to the information provided by the battery manu-
facturer.
Operating Instructions
Power Peak ® B6 EQ-BID
58 26
# 30 8561
-
-