Example For Setting The Charging Current; Settings N Manual Mode - Multiplex Power Peak B6 EQ-BID Operation Instructions Manual

Button
Button
Button
Button
7.2

EXAMPLE FOR SETTING THE CHARGING CURRENT

example of how the charging current is changed. The other parameters are set in the same
way.
7.3 SETTINGS IN MANUAL MODE
Several settings are required before charging or discharging is started in manual mode.
This will ensure optimum operation of the charger in manual mode:
Note: Only values in the first line can be changed while the arrow symbol is flashing.
Operating Instructions
Power Peak ® B6 EQ-BID
Button
Button
Button
There is a separate Setting menu with correspon-
ding display for each charge or discharge parame-
ter. The parameter to be changed is selected with
indicated by an arrow on the right-hand edge of the
display. The setting procedure is initiated by pres-
the right-hand edge. A new value can be set with
setting. The illustrated display sequence shows an
13 45
Button
Button
# 30 8561
Button