Specification - Multiplex Power Peak B6 EQ-BID Operation Instructions Manual

STOP / ENTER BUTTON
menu.
DATA VIEW BUTTON
cell voltages of a connected LiPo battery pack .
All buttons have an Autorepeat function so that the respective function is repeatedly
switched when the button is held pressed.
INTEGRATED ACOUSTIC GENERATOR
signals the end of charging/discharging as well as a fault.
4.

SPECIFICATION

Operating voltage:
Number of cells:
Charging current:
Discharging current:
Equalizing current:
Charging power:
Discharging power:
Trickle charge:
Cut-off voltae:
Charge termination:
NC/NiMH:
Lead and lithium:
Dimensions:
Functions:
Operating Instructions
Power Peak ® B6 EQ-BID
12 V DC (car battery)/230 V AC mains operation
(Do not use battery charger for car batteries!)
1 ... 14 cells NC/NiMH,
1 ... 6 cells LiIo (3.6 V), LiPo (3.7 V), LiFe (3.3 V)
1 ... 6 cells (2...12 V) lead battery
0.1 ... 5 A at max. 50 W
0.1 ... 1 A at max. 5 W
max. 300 mA
50 W, current is controlled accordingly
e.g. 24 V battery voltage, charging current approx. 2.0 A
5 W, current is controlled accordingly
e.g. 4.8 V battery voltage, discharging current approx. 1.0 A
Charged capacity <1 Ah: No trickle charge
(only NC and NiMH)
0.8 V per cell for NC and NiMH,
3.0 V per cell for LiPo, Lilo
2.5 V per cell for LiFe
1.8 V per cell for lead batteries
Automatic, digital Delta-Peak system
Automatic, voltage-dependent, CC-CV method
142 x 89 x 25 mm
Charge, discharge, discharge-charge, balance
10 internal storage locations
39 7
# 30 8561