Usb Pc Port - Multiplex Power Peak B6 EQ-BID Operation Instructions Manual

11.

USB PC PORT

Operating Instructions
Power Peak ® B6 EQ-BID
This fault can occur when, for example, a BID key
is connected before the charger has been switched
on. Remove the BID key and switch off the charger.
If this message reappears, send in the charger to
Multiplex Service.
The POWER PEAK ® B6 EQ-BID is equipped
with a mini USB port in the left-hand side sec-
tion. The USB lead used to connect to a PC is
connected to this port. With this lead you can use
the free LogView donationware for recording, sto-
ring, managing and printing battery data (Internet
address: www.logview.info).
curves with capacity display. For a clearer over-
view the curves can be individually masked in and
out. The data can also be optionally displayed on
a large-scale digital display or on an analogue
display.
The recorded data can be converted directly to
the commonly used file formats *.csv, *.xls or
*.htm.
This enables further processing in table calcula-
tion programs (Excel, etc.) where data and cur-
ves can be conveniently compared against each
other.
An integrated label print program makes it possi-
ble to simply print out battery data for the purpose
of identifying the battery pack.
56 24
# 30 8561