Plantronics Savi W440 User Manual page 16

Ringtones and Volumes
Second inbound call
When you are on a call and a second call comes in, this feature enables you to control the
ring behaviour for the second call. The options are for the call to Ring continuously until
answered (default), for the call to Ring once and then be silent until answered, or for the call
to be ignored completely if Ignore ring is selected.
Feature
PC ringtone
Mute Reminder Volume
System tone
Wearing preference for volume control
NOTE For Savi 440/445 models only
Ring location
PC ringtone
Select the ringtone and volume that your hear when your PC softphone rings.
Mute Reminder Volume
Controls the volume of the tone to remind you your microphone is muted, or turn the mute
tone off.
System tone
Sets the volume of your computer's system tones.
Wearing preference (enabled for Savi 440/445 only)
Volume controls are oriented up/down for right-ear wearing; when switched to left-ear
wearing the volume controls will be reversed. This setting allows for the reversal of the up/
down volume orientation for left-ear wearing.
Ring location
This feature gives you the option to have the PC ringtone played on both the headset as well
as the PC speaker.
When this feature is selected, the PC ringtone will be heard on both the PC speaker as well
as the headset.
When this feature is not selected, the PC ringtone will only be heard on either the headset or
the PC speaker based on how the PC audio has been set up.
Settings
Tone 1/Tone 2/Tone 3
Default/Low/Off
Default volume/Low
Volume/Off
Default/Low/Off
No change/Left ear/Right
ear
Headset, Headset/PC
Default
Tone 2
Default volume
Off
Default volume
No change
Headset only