Table of Contents
Advertisement
•
BLUE rack for glasses: the glasses should be
placed upside down.
•
YELLOW container for cutlery: insert 15 items, with
the handles pointing downwards, in each container.
•
Available as accessories: dividers for glasses and
rack for dishes with maximum diameter of 320 mm.
C4
END OF WORK AND DAILY CLEANING
The appliance is designed to carry out an automatic
cleaning cycle to help flush out any residues and to
guarantee greater health and hygiene:
•
Open the door and take out the rack containing the
clean dishes.
•
Remove the tank filter "C" and the overflow "W".
W
•
Close the door.
•
Select the drain cycle by pressing button "B"
(Fig. 15).
•
The message "CLE" ("CLEAN") will be displayed
throughout the drain cycle:
•
After a few minutes, 3 beeps indicate the end of the
cleaning cycle and "END" blinks on the display:
14
Fig. 18
Fig. 19
C
Fig. 20
CLE
END
•
Switch off the dishwasher by pressing button "A"
(Fig. 15).
•
Switch off at the mains.
•
Close the water supply cock.
•
Replace the filter and the overflow.
Clean the nozzle jets
•
Remove the top and bottom jets "F" and "I",
unscrewing the ring nut "H".
F
C
•
Carefully clean the washing and rinse jets and
clean everything with hot water and neutral deter-
gent/detersive, if necessary using a soft brush or
sponge. Do not use sharp implements to clean the
nozzle holes, which could otherwise be damaged.
Cleaning the filter
•
Remove the filter "E" and clean away any remained
food in order to avoid blocking the draining system.
E
Upon completion of cleaning operations, replace the
parts removed previously.
Cleaning the exterior surfaces
Before carrying out any cleaning operations, turn off
the power at the mains.
Clean the stainless steel surfaces using warm soapy
water; never use detergents containing abrasive sub-
stances nor steel scrapers, common wire wool,
brushes or scrapers; rinse thoroughly using a wet cloth
and carefully wipe dry. Clean the control panel using a
soft damp cloth and a neutral detergent if necessary.
Do not wash the appliance using direct or high-pres-
sure water jets. To reduce the emission of pollutants
into the environment, clean the appliance (externally
and where necessary internally) with products having
a biodegradability of over 90%).
H
I
Fig. 21
Fig. 22
Advertisement
Table of Contents
