SAFETY & WARNINGS • Read all instructions before using the appliance and retain this guide for reference. • Unplug the monitor before cleaning it. • Use a clean, slightly dampened cloth to wipe the main monitor body. • To clean the screen: turn it off, unplug it and wait for it to cool completely, then wipe it with a dry microfibre cloth.
Page 4
COMPONENTS LED monitor Stand Base User guide DisplayPort cable Power cable Adapter...
Page 5
OVERVIEW Source C. Down D. Right Left Menu/Enter G. Power Controls DC IN HDMI 1 HDMI 2 DP AUDIO OUT Ports...
Page 6
ASSEMBLY Installing the stand Clear a table and place a piece of soft cloth on it to prevent the LED monitor from being scratched. Lay the LED monitor flat on the table with the LED screen facing down. Insert stand into the monitor, then secure the base by tightening the screw. Stand the LED monitor up.
Page 7
VESA mount Follow the steps below to install onto a monitor arm or wall mount (not included). Place the mounting plate onto the back of the LED monitor, lining up the holes of the plate with the holes in the back of the monitor. Insert the 4 screws into the holes and tighten.
OPERATION Setup Connect a HDMI or DisplayPort cable from your monitor to the computer. Connect the power adapter to a properly grounded AC outlet, then to the monitor. The indicator LED will illuminate blue. Power on the computer, then power on the monitor. Set the display mode on your computer accordingly.
Page 9
Button operation A. Source button • Press the button to display all the signal channel menus. • Press the button to exit the OSD menu. B. Up button C. Down button D. Right button E. Left button • Press these buttons to move the cursor to the needed function. •...
Page 10
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the “ ” button. When using the monitor for the first time, the monitor will configure optimal settings automatically.
Page 11
List of Functions Main Menu Sub-Menu Options Description Brightness ~0-100 Adjust display brightness Contrast ~0-100 Adjust display contrast Turns dynamic contrast ratio on or Picture STANDARD/PHOTO/ GAME/MOVIE/ Preset colour modes FPS/RTS Normal Warm Select colour temperature mode or Colour allow manual colour configuration Temperature (USER) Cool...
Page 12
Auto Source/ DP/ Select input source or allow Input Source HDMI1/ HDMI2 manual selection Enable or disable monitor speaker Mute output High Setup Volume Adjust monitor speaker volume Restore factory defaults for all Reset settings Automatic identification of signal Audio Source source Wide Screen Aspect Ratio...
Page 13
Multi-Window PiP Mode Select multi-window mode PBP 2Win PBP 3Win Sub Win2 Input DP Select source to be displayed in DP HDMI1 the second window DP HDMI2 Sub Win3 Input DP Select source to be displayed in Multi- DP HDMI1 the third window Window DP HDMI2...
Page 16
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...