Using The Accessories - AEG BP3003021 User Manual

10 www.aeg.com
Sym-
bol
Press
change the clock function.
Press
of the clock functions, or wait 5
seconds for the setting to be
confirmed automatically.
6.1 Setting the Duration or
End function
1.
Press
symbol
play.
2. Press + or - to set the minutes.
3.
Press
4. Press + or - to set the hour.
5.
Press
6. When the set time ends, the symbol
acoustic signal sounds for two mi-
nutes. The appliance deactivates.
Press a button or open the appli-
ance door to stop the signal.
If you press
time for Duration
ance switches to setting the End
6.2 Setting the Minute Minder
Used to set a countdown time. The max-
imum time you can set is 23 hours 59 mi-
nutes. This function has no effect on the
operation of the oven. You can set the

7. USING THE ACCESSORIES

WARNING!
Refer to the Safety chapters.
Function
Duration To set how long the appliance must operate. First set
an oven function before you set this function.
End To set when the appliance must be deactivated. First
set an oven function before you set this function. You
can use Duration and End at the same time (Time De-
lay) to set the time when the appliance must be activa-
ted and then deactivated.
again and again to
to confirm the settings
again and again until the
or flashes in the dis-
to confirm.
to confirm.
or and the set time flash. The
while setting the
function.
Minute Minder at any time, also if the
appliance is off.
1.
2.
3.
4.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
, the appli-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
hold + and -. The timer starts to count
up again.
Description
Press again and again until
and 00 flash in the display.
Press + or - to set the Minute Mind-
er. At first the time is calculated in
minutes and seconds. When the
time you set is longer than 60 mi-
nutes, the symbol
the display. The appliance then cal-
culates the time in hours and mi-
nutes.
The Minute Minder starts automati-
cally after five seconds.
When the set time ends, the acous-
tic signal sounds for two minutes.
00:00 and flash in the display.
Press a button to stop the signal.
If you set the Minute Minder
when the Duration
function operates, the symbol
comes on in the display.
You cannot use the Count Up
Timer when the Duration
End function operates.
comes on in
or End
or