Technical Specifications; Replacement Parts - FLORABEST FBM 190 A1 Translation Of Original Operation Manual

GB MT

Technical Specifications

Engine ................4-stroke Briggs&Stratton
.................................................. 675 series
B&S Engine design number ...126T020307B1
Engine size ...................................190 cm
Blade rotation speed................. 2800 min
Blade torque ................................... 45 Nm
Wheel drive......................... Max. 3.3 km/h
Petrol tank volume .............................. 1.0 l
Octane rating ....................................95-98
Engine oil tank volume ....................... 0.6 l
Spark plug .................. Champion RJ19LM
Cutting circle .................................510 mm
Cutting height ..............7-stage, 30-70 mm
Grass collection box volume................ 60 l
Weight (inc. collection box) ............ 35.6 kg
Sound pressure level
(L ) ....................76 dB(A); K=3.0 dB(A)
pA
Sound power level (L
measured ......... 95.5 dB(A); K=2.41 dB(A)
guaranteed ...............................98 dB(A)
Vibration at the handle
(a ) .................... 4.337 m/s
n
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
72
)
WA
; K=1.5 m/s
2
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Noise and vibration values were deter-
3
mined according to the standards and
-1
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.

Replacement parts

Replacement parts can be ordered direct-
ly from our service centre. Please indicate
the machine type and the number of the
spare part with your order.
2
Replacement blade.................... 91097511
Blade screw ...............................91090597
Grass collection box ...................91097576
Air filter ......................................30250010
Spark plug .................................30220210
B&S fuel stabiliser, 125 ml ..........30230028
B&S Engine oil, 600 ml ..............30230029
Maintenance set
(air filter, 30 ml fuel stabiliser,
600 ml engine oil, spark plug) ......30270000
Replacement parts and accessories for
the engine (e.g. air filters and spark plugs)
can also be ordered directly from Briggs &
Stratton.
If further spare parts should be neces-
sary, please find the part number on the
exploded drawing.