Makita UH200D Technical Information page 4

R
epair
[2] DISASSEMBLY/ASSEMBLY
[2]-1. Gear 12-31, Helical gear 47
ASSEMBLING
(1) Assemble Helical gear 47, Gear 12-31. (Figs. 4, 5)
And mount them to Housing set (L). (Fig. 6)
Fig. 4
1. Face the crank side of
Helical gear 47 to the bottom.
Crank side of Helical gear 47
Fig. 5
4. Pass Pin 6 through Gear 12-31
and two Washers 6 as drawn below,
then set them in place in Housing L.
Pin 6
Washer 6
Gear 12-31
Washer 6
(2) Assemble Protector to housing set. (Center right in Fig. 2)
(3) Mount Crank complete. (Fig. 7)
Fig. 7
<Note>
Crank complete has an interchangeability between UM164D
cordless grass shear and UH200D cordless hedge trimmer by
reversing as illustrated below.
In case of UH200D, engage this side with Shear blade assembly.
for UM164D
(4) Mount Shear blade assembly and Under cover. See Figs. 10, 11 in "[3]-3. Shear Blade Assembly".
2. Assemble two Pins 4 to
Helical gear 47 by pressing
with Arbor press.
Fig. 6
Housing set (L)
Rib
DC Motor
for UH200D
3. Facing the notch side of Pin 6
to top, pass it through Washer 6
into Helical gear 47.
Pin 6
Pin 4
(2pcs.)
Helical gear 47
Notch on Pin 6
5. Assemble Helical gear 47 with
fitting the notch of Pin 6 on the Rib
of Housing set (L).
6. Mount Crank complete and Dust guard.
Crank complete
Dust guard
P 4/ 8
Notch
Washer 6