Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha FZ1-N Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. License plate light unit
2. Remove the socket (together with
the bulb) by pulling it out.
1. License plate light bulb
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24310 3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.
1. Remove the headlight unit by re-
1. Bolt
2. Remove the auxiliary light coupler
6-32
moving the bolts on each side.
bracket by removing the screws.
EAU39381
6