Catalytic Converter; Seats - Yamaha FZ1-N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Catalytic converter

This vehicle is equipped with catalytic
converters in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. Make sure that the exhaust
3 system has cooled down before do-
ing any maintenance work.
CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
G Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
G
Do not allow the engine to idle
too long.
EAU13441

Seats

Passenger seat
EWA10860
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
ECA10700
1. Passenger seat lock
2. Unlock.
2. Pull the passenger seat forward,
and then lift it up.
To install the passenger seat
1. Place the passenger seat in the
original position, and then push the
rear of the seat down to lock it in
place.
EAU39321
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Push the rider seat lock lever, lo-
3-16
cated under the back of the rider
seat, to the left as shown, and then
pull the seat off.