Yamaha XVS950CR Owner's Manual page 21

 two tripmeters (which show the
distance traveled since they were
last set to zero)
 a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
 a clock
 a self-diagnosis device
TIP
 Be sure to turn the key to "ON" be-
fore using the "SELECT" switch.
 For the UK only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
ters and miles,
odometer mode, and then push
the "SELECT" switch for at least 5
seconds.
INSTRUMENT AND CONTROL FUNCTIONS
1. "SELECT" switch
Speedometer
The speedometer shows the vehicle's
traveling speed.
select the
Odometer, tripmeters, fuel reserve
tripmeter and clock
1. Odometer/tripmeter/fuel reserve tripme-
ter/clock
Push the "SELECT" switch to switch
the display between the odometer
mode "ODO", the tripmeter modes
"TRIP 1"and "TRIP 2" and the clock
mode in the following order:
ODO → TRIP 1 → TRIP 2 → clock →
ODO
1
If the fuel level warning light comes on
(see page 3-3), the odometer display
will automatically change to the fuel re-
serve tripmeter mode "TRIP F" and
start counting the distance traveled
from that point. In that case, push the
"SELECT" switch to change the dis-
play between the various tripmeter and
odometer modes in the following or-
der:
TRIP F → TRIP 1 → TRIP 2 → clock →
ODO → TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" switch, and then
push the "SELECT" switch for at least
1
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically, and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
3-6
3