Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha XVS950CR Owner's Manual

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24182
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screws.
2
1. Screw
2. Turn signal light lens
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
6-29
EAU24215
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
1
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
6
[ECA10682]