Replacing A Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha XJR1300 Owner's Manual

Replacing a tail/brake light
bulb
1. Remove the seat. (See page
3-14.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Tail/brake light bulb socket
3. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24170
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24202
1. Turn signal light bulb
3. Insert a new bulb into the socket,
4. Install the lens by installing the
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-30
push it in, and then turn it clock-
wise until it stops.
screw.
6
ECA11190