Alarm Function - BMW C 650 GT Rider's Manual

Deactivating motion
5
sensor
56
Press button 1 on the remote
control a second time during
the activation phase.
Turn indicators flash three
times.
Alarm tone sounds three times.
z
Motion sensor is deactivated.

Alarm function

with anti-theft alarm (DWA)
Alarm triggers
An alarm can be triggered by:
the motion sensor
attempt to switch on the igni-
tion with an unauthorised key
disconnection of the anti-theft
alarm (DWA) from the vehicle's
battery (DWA internal battery
in the anti-theft alarm provides
power).
Alarm
OE
An alarm lasts for 26 seconds.
The system is active again an-
other 12 seconds later. You can
interrupt an alarm at any time by
pressing button 1 on the remote
control. This function does not
change the status of the anti-
theft alarm.
While an alarm is in progress an
alarm tone sounds and the turn
indicators flash. You can program
the type of alarm tone.
Reason for an alarm
Once you have deactivated the
alarm function, the anti-theft
alarm status indicator is active for
a period of one minute to show
you reasons for alarms, if any,
that were triggered in your ab-
sence:
Flashes 1x: Motion sensor;
motorcycle was rocked forward/
back
Flashes 2x: Motion sensor;
motorcycle was rocked to the
side
Flashes 3x: Ignition switched
on with unauthorised key