Reading - BMW C 650 GT Rider's Manual

Press and hold down button 2
4
(INFO) in each case until the
next value starts to flash.
40
After setting the time, press
and hold down button 2 (INFO)
until the reading stops flashing.
This completes the process.
You can exit the process at the
end of each step:
Without pressing any buttons,
wait until the reading stops
flashing.
z
The settings already made are
accepted.

Reading

Selecting readings
Switch on the ignition.
Press button 1 (TRIP) to select
the reading in panel 3.
The following values can be dis-
played:
Total distance covered
Trip 1
Tripmeter 1 (
Trip 2
Tripmeter 2 (
The 'automatic' tripmeter
Trip A
( ) is reset automatic-
ally five hours after the ignition
is switched off and the date
has changed
Distance travelled after fuel
down to reserve
Press button 2 (INFO) to select
the reading in panel 4.
The following values can be dis-
played:
Ambient temperature (
) Average speed (
) Average fuel consumption
ØFUEL
(
Current consumption (
Date
Date (
Oil-level reminder (
with tyre pressure monitoring
(RDC) OE
Tyre pressures (
TEMP
)
ØSPEED
)
)
FUEL
)
)
OIL
)
RDC
)