BMW C 650 GT Rider's Manual page 57

Activation with motion
sensor
The alarm function is activated
by pressing button 1 on the
remote control once, or
by switching off the ignition (if
programmed); when the igni-
tion is switched off 30 seconds
elapse before the start of the
activation phase
Activation is confirmed
by the turn indicators flashing
twice and
by the alarm tone sounding
twice.
If you want to activate the alarm
function more than one minute
after switching off the ignition,
you must press button 1 for
longer than one second.
Activation phase
The anti-theft alarm needs 15
seconds to achieve fully active
status. No alarm is triggered dur-
ing this time.
Conserving battery power
If it remains deactivated for ap-
proximately one hour, the anti-
theft alarm shuts down in order
not to draw power unnecessar-
ily from the battery. If you want
to activate the alarm function
after the anti-theft alarm has shut
down in this way, you have to
switch the ignition on and then
off again.
Motion sensor when the
Maxi-Scooter is to be
transported
If you want to transport your
Maxi-Scooter by train or on a
trailer, for example, it is advis-
able to switch off the motion
sensor. If the motion sensor
is not switched off the severe
movements occurring in transit
could trigger the alarm.
5
55
z