BMW C 650 GT Rider's Manual page 102

9
100
Raise the front wheel, insert
quick-release axle 2 and
tighten to specified torque.
Quick-release axle in axle
z
holder
30 Nm
Tighten axle clamping screws 1
to the specified tightening
torque.
Clamping screws (quick-
release axle) in tele-
scopic forks
Tightening sequence: Tighten
screws six times in alternate
sequence
8 Nm
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
Tighten screws 2 on left and
right to the specified tightening
torque.
Brake caliper to fork leg
28 Nm
The cable of the wheel-
speed sensor could chafe
through if it comes into contact
with the brake disc.
Make sure that the sensor
cable is routed correctly.
Insert the ABS sensor into its
bore and install screw 1.