Bmw Motorrad Front-Wheel; Stand - BMW C 650 GT Rider's Manual

BMW Motorrad front-
9
wheel stand
104
Install the front-wheel

stand

Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
Use basic stand with tool num-
ber (83 30 0 402 241) in com-
bination with front-wheel ad-
apter (83 30 0 402 242).
z
Install rubber buffers 1 in the
bottom positions on left and
right.
Slacken securing screws 2 on
left and right.
Push adapters 3 on left and
right apart until the front forks
fit between them.
Use locating pins 4 on left and
right to set the front-wheel
stand to the desired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align adapters 3 on left and
right so that the front forks are
securely seated.
Tighten securing screws 2 on
left and right.