General; Description And Location Of Parts (Us, Canadian Model) - Sony STR-DG910 Service Manual

QQ
3 7 63 1515 0
US, Canadian model:
Getting Started
Description and location of parts
Front panel
1 1 1 2 2 2 3 3 3 4 4 4 5 5 5
?/1 ?/1 ?/1
TONE MODE TONE MODE TONE MODE TUNING MODE TUNING MODE TUNING MODE
TONE TONE TONE TUNING TUNING TUNING
SPEAKERS SPEAKERS SPEAKERS
(OFF/A/B/A+B) (OFF/A/B/A+B) (OFF/A/B/A+B)
AUTO CAL MIC AUTO CAL MIC AUTO CAL MIC
MEMORY/ MEMORY/ MEMORY/
ENTER ENTER ENTER
VIDEO 3 IN/PORTABLE AV IN VIDEO 3 IN/PORTABLE AV IN VIDEO 3 IN/PORTABLE AV IN
PHONES PHONES PHONES
VIDEO VIDEO VIDEO L AUDIO R L AUDIO R L AUDIO R
wa wa wa w; w; w; ql ql ql qk qk qk
.
Name Function
A ?/1
Press to turn the receiver on
(on/standby) or off (page 32, 43, 44, 66).
B SPEAKERS
Press to select the speaker
(OFF/A/B/A+B) system (page 33).
C TONE MODE
Adjusts the tonal quality
(bass/treble level) of the
TONE +/–
front speakers.
Press TONE MODE
repeatedly to select bass or
treble level, then turn
TONE +/– to adjust the
level (page 46).
D TUNING MODE
Press to select the tuning
mode (page 67, 69, 72–74).
E TUNING +/–
Turn to scan a station (page
67, 69, 72–74).
TE
L 13942296513
About the indicators on the display
1 2 3 4 5
; ;
SP A D EX
SW LFE
SP B
L C R
SL S SR
SBL SB SBR
qj
Name Function
A SW
Lights up when sub woofer is
set to "YES" (page 48) and the
audio signal is output from the
SUB WOOFER jacks.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used (page 33).
However, these indicators do
not light up if the speaker output
is turned off or if headphones
are connected.
D ; D (EX)
Lights up when the receiver is
decoding Dolby Digital signals.
"; D EX" lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
www
set to "ANALOG" (page 78).
.
http://www.xiaoyu163.com
6 6 6 7 7 7 9 9 8 8 8 9 q; q; q;
MASTER VOLUME MASTER VOLUME MASTER VOLUME
MULTI CHANNEL DECODING MULTI CHANNEL DECODING MULTI CHANNEL DECODING
DISPLAY DISPLAY DISPLAY INPUT MODE INPUT MODE INPUT MODE
INPUT SELECTOR INPUT SELECTOR INPUT SELECTOR
CATEGORY CATEGORY CATEGORY
MODE MODE MODE CATEGORY CATEGORY CATEGORY 2CH 2CH 2CH A.F.D. A.F.D. A.F.D. MOVIE MOVIE MOVIE MUSIC MUSIC MUSIC AUTO CAL AUTO CAL AUTO CAL
qj qj qj qh qh qh qg qg qg qf qf qf qd qd qd
Name Function
F Display
The current status of the
selected component or a list
of selectable items appears
here (page 7).
G MULTI
Lights up when multi
CHANNEL channel audio signals are
decoded (page 44).
DECODING lamp
H Remote sensor Receives signals from
remote commander.
I DISPLAY
Press to select information
displayed on the display
(page 74, 83).
J INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 78).
continued
6 7 8 9 q;
;
PL IIx PL OPT DTS -ES 9 6 / 2 4 CAT MEMORY
HDMI COAX NEO:6 D.RANGE
qh qg qf qd
Name Function
E ; PL II (x)
Lights up when the Pro Logic II
Movie/Music/Game decoder is
activated.
"; PL IIx" lights up when the
Pro Logic IIx Movie/Music/
Game decoder is activated.
However, these indicators do
not light up if both the center
and surround speakers are set to
"NO" (page 48) and you select a
sound field using the A.F.D.
button.
Note
Dolby Pro Logic IIx decoding
does not function for signals
with a sampling frequency of
more than 48 kHz.
F ; PL
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
However, these indicators do
not light up if both the center
and surround speakers are set to
"NO" (page 48) and you select a
sound field using the A.F.D.
button.
G OPT
Lights up when INPUT MODE
is set to "AUTO IN" and the
x ao
source signal is a digital signal
y
being input through the
OPTICAL jack, or when
INPUT MODE is set to "OPT
i
IN" (page 78).
continued
http://www.xiaoyu163.com
SECTION 1

GENERAL

8
Name
K MASTER
VOLUME
L DIRECT
M AUTO CAL
qa qa qa
N INPUT
SELECTOR
O 2CH
A.F.D.
MOVIE
MUSIC
P CATEGORY +/– Press to select a category
DIRECT DIRECT DIRECT
Q CATEGORY
MODE
R MEMORY/
ENTER
qs qs qs
S VIDEO 3 IN/
PORTABLE AV
IN jacks
T PHONES jack
U AUTO CAL MIC
jack
Q Q
3 6 7 1 3
6 US
5 US
Name
H DTS (-ES)/
(96/24)
qa
ST
MONO
qs
I CAT
J MEMORY
K Tuner
indicators
L Preset
station
indicators
M D.RANGE
N NEO:6
O COAX
P HDMI
u163
.
8 US
7 US
2 9 9 4 2 8
This section is extracted
from instruction manual.
Function
Turn to adjust the volume
level of all speakers at the
same time (page 40, 41, 43,
44).
Press to listen to high
quality analog sound (page
65).
Press to activate the Auto
Calibration function (page
36).
Turn to select the input
source to playback (page
41).
Press to select a sound field
(page 60, 62, 65).
for XM Radio (page 74).
Press to select the category
mode for XM Radio (page
73).
Press to store a station or
enter the selection when
selecting the settings (page
32, 68, 75).
Connects to a camcorder or
video game (page 28, 41).
Connects to headphones
(page 94).
Connects to the supplied
optimizer microphone for
the Auto Calibration
function (page 35).
1 5 0 5 8 2 9 9 4
Function Name
Q Playback
Lights up when the receiver is
channel
decoding DTS signals.
"DTS-ES" lights up when the indicators
receiver is decoding DTS-ES
signals.
"DTS 96/24" lights up when the
receiver is decoding DTS 96
L
kHz/24 bit signals.
Note R
C
When playing a DTS format
disc, be sure that you have made SL
SR
digital connections and that
S
INPUT MODE is not set to
"ANALOG" (page 78).
Lights up when category mode
SBL
is set to "ONE CAT" during
SBR
XM Radio operation (page 73).
SB
Lights up when a memory
function, such as Preset
Memory (page 68), etc., is
activated.
Lights up when using the
receiver to tune in radio stations
(page 66), etc.
Lights up when using the
receiver to tune in preset radio
stations. For details on
presetting radio stations, see
page 68.
Lights up when dynamic range
compression is activated (page
46).
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 61).
Lights up when INPUT MODE
is set to "AUTO IN" and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to "COAX
m
IN" (page 78).
Lights up when the receiver
recognizes a component
co
connected via a HDMI IN jack
(page 21).
STR-DG910
9 9
2 8 9 9
Function
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speakers are set to "NO" (page
48)
Sound Field: A.F.D. AUTO
SW
L C R
SL SR
5