Super Circuits CD50WR Manual

INSTRUCTION MANUAL

COLOR VANDAL PROOF CAMERA
INSTRUCTION MANUAL
D144-CB90HL-TDN3-AC5-UTP
CD50WR
COLOR VANDAL PROOF CAMERA
About this manaul
D144-CB90HL-TDN3-AC5-UTP
Before installing and using the camera, please
CD50WR
read this manual carefully.
Be sure to keep it handy for later reference.
About this manaul
Before installing and using the camera, please
read this manual carefully.
Be sure to keep it handy for later reference.
Dimensions : mm
PRECAUTIONS
Do not open or modify
Do not open the cabinet exet during maintenance and
installation, as it may be dangerous and cause damages.
PRECAUTIONS
Do not put objects inside the unit
Make sure that no metal objects or flammable substances get
insdie the camera. It could cause fire, short-circuits or damages.
Do not open or modify
Be careful when handling the unit
Do not open the cabinet exet during maintenance and
To prevent damage, do not drop the camera or subject
installation, as it may be dangerous and cause damages.
it to strong shock or vibration.
Do not put objects inside the unit
Install away from electric or magnetic fields
Make sure that no metal objects or flammable substances get
Protect from humidity and dust
insdie the camera. It could cause fire, short-circuits or damages.
Protech from high temperature
Be careful when handling the unit
Be careful when installing colose to the ceiling , in a kitchen or
To prevent damage, do not drop the camera or subject
boiler room, as the temperature may raise to high levels.
it to strong shock or vibration.
Cleaning
Install away from electric or magnetic fields
Dirt can be removed from the cabinet only by wiping it
Protect from humidity and dust
with a soft cloth moistened with a soft detergent solution.
Protech from high temperature
Mounting Surface
Be careful when installing colose to the ceiling , in a kitchen or
The mounting surface material must be strong enough to secure
boiler room, as the temperature may raise to high levels.
the camera.
Cleaning
Dirt can be removed from the cabinet only by wiping it
with a soft cloth moistened with a soft detergent solution.
Mounting Surface
The mounting surface material must be strong enough to secure

TROUBLESHOOTING

the camera.
Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your
service center.
If no image appears

CONNECTIONS AND CAMERA SETTINGS

Is the coaxial cable attached securely?
Are the power and voltage normal?
Platinum SerieS
Camera manual
CD50WR Dome Camera
Dimensions : mm
Dimensions : mm
CONNECTOR AND CAMERA SETTING
CONNECTIONS
TROUBLESHOOTING
Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your
service center.
TROUBLESHOOTING
If no image appears
Is the coaxial cable attached securely?
Before sending the camera out for repair, check the items below.
Are the power and voltage normal?
If the problem persists after checking these items, contact your
Has the iris of the lens inside the camera been
service center.
adjusted correctly (with the level volume) ?
Is there adequate illumination?
If no image appears
Is the coaxial cable attached securely?
If the image is unclear
Are the power and voltage normal?
Is the lens in focus?
Has the iris of the lens inside the camera been
Is the lens dirty?
adjusted correctly (with the level volume) ?
Dirt of fingerprints on the lens can adversely affect the
Is there adequate illumination?
images. Gently wipe any dirt or fingerprints off the lens
with a soft cloth or lens cleaning paper and cleaning
CAUTION :
If the image is unclear
fluid (commercially available).
Check for polarity when using a DC 12V power supply.
Is the lens in focus?
Is the monitor adjusted correctly?
Is the lens dirty?
Dirt of fingerprints on the lens can adversely affect the
images. Gently wipe any dirt or fingerprints off the lens
WARNING:
with a soft cloth or lens cleaning paper and cleaning
TO PREVENT THE RISK OF FIRE OR ELECTRIC
fluid (commercially available).
INSTALLATION
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
Is the monitor adjusted correctly?
RAIN OR MOISTURE.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
C
C
I
IN