Table Of Contents; Introduction - Toro 30845 Operator's Manual

This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.

Introduction

This rotary-blade grass cutting deck is mounted
to a ride-on machine and is intended to be used
by professional, hired operators in commercial
applications. It is primarily designed for cutting grass
on well-maintained lawns in parks, sports fields, and
on commercial grounds. It is not designed for cutting
brush, mowing grass and other growth alongside
highways, or for agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. The model
and serial numbers are stamped on a plate on the rear of
the cutting unit, under the cover. Write the numbers in
the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 1), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
© 2009-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Safety and Instructional Decals ............................. 3
Setup............................................................................ 5
Adjusting the Height-of-Cut ................................. 5
Adjusting the Roller Scraper (Optional)................. 5
Installing the Mulching Baffle (Optional)............... 6
Product Overview ........................................................ 6
Specifications ....................................................... 6
Dimensions and Weights (approx.)........................ 6
Attachments/Accessories..................................... 6
Operation..................................................................... 7
Selecting a Blade................................................... 7
Operating Tips ..................................................... 7
Maintenance................................................................. 9
Recommended Maintenance Schedule(s) .................. 9
Greasing the Bearings........................................... 9
Separating the Cutting Decks from the
Traction Unit.................................................... 9
Mounting the Rear Cutting Decks to the
Traction Unit.................................................. 10
Mounting the Front Cutting Decks to the
Traction Unit.................................................. 10
Servicing the Blade Plane.................................... 11
Removing the Cutter Blade ................................. 12
Inspecting and Sharpening the Blade................... 12
Checking the Blade Stopping Time...................... 13
Servicing the Front Roller ................................... 13
Storage....................................................................... 14
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved