Greasing The Machine - Toro 30645 Operator's Manual

D. Tighten each hose connection.
4. Route all hoses correctly, clean the connections, and
tighten all hose lines. Retain the hose plugs and port
caps for future use.
5. Use the cable ties provided to secure the hose lines.
6. Raise the operator's platform on the traction unit, and
connect the cutter-valve, electrical connector
1. Cutter-valve electrical port
7. Check the fluid levels, secure the operator's platform
on the traction unit, and verify that the cutting unit is
working correctly.
6

Greasing the Machine

No Parts Required
Procedure
To ensure proper lubrication, you must grease the machine
before operation; refer to
to properly lubricate the machine, premature failure of parts
will result.
1
g017952
Figure 6
Lubrication (page 16). If you fail
(Figure 6).
11