Toro Mower Safety - Toro 30645 Operator's Manual

•
Replace faulty silencers/mufflers.
•
Check that operator's presence controls, safety switches
and shields are attached and functioning properly. Do not
operate unless they are functioning properly.
•
Before using, always visually inspect to see that the
blades, blade bolts, and cutting assembly are not worn
or damaged.
•
On multi-bladed machines, take care as rotating 1 blade
can cause other blades to rotate.
Operation
•
Never run an engine in an enclosed area.
•
Only operate in good light, keeping away from holes and
hidden hazards.
•
Be sure all drives are in neutral and parking brake is
engaged before starting engine. Only start engine from
the operator's position.
•
Slow down and use extra care on hillsides. Be sure to
travel in the recommended direction on hillsides. Turf
conditions can affect the stability of the machine. Use
caution while operating near drop-offs.
•
Slow down and use caution when making turns and when
changing directions on slopes.
•
When using any attachments, never direct discharge of
material toward bystanders nor allow anyone near the
machine while in operation.
•
Never raise deck with the blades running.
•
Never operate with guards not securely in place. Be
sure all interlocks are attached, adjusted properly, and
functioning property.
•
Do not change the engine governor setting or overspeed
the engine.
•
Stop on level ground, lower the cutting units, disengage
drives, engage parking brake (if provided), shut off engine
and remove the key from the ignition before leaving the
operator's position for any reason.
•
Stop the equipment, engage parking brake (if provided),
shut off engine, remove the key from the ignition and
inspect the blades after striking objects or if an abnormal
vibration occurs. Make necessary repairs before resuming
operations.
•
Keep hands and feet away from the cutting units.
•
Look behind and down before backing up to be sure of
a clear path.
•
When machine is to be parked, stored, or left unattended,
lower the cutting units unless a positive mechanical lock
is provided.
•
Never carry passengers and keep pets and bystanders
away.
•
Slow down and use caution when making turns and
crossing roads and sidewalks. Stop blades if not mowing.
•
Do not operate the mower under the influence of alcohol
or drugs.
•
Lightning can cause severe injury or death. If lightning
is seen or thunder is heard in the area, do not operate
the machine; seek shelter.
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Use care when approaching blind corners, shrubs, trees,
or other objects that may obscure vision.
•
The operator shall turn on flashing warning lights, if
provided, whenever traveling on a public road, except
where such use is prohibited by law.
Maintenance and Storage
•
Disengage drives, lower the cutting units, move traction
pedal to Neutral, set parking brake, stop engine and
remove key. Wait for all movement to stop before
adjusting, cleaning or repairing.
•
Clean grass and debris from cutting units, drives, muffler
and engine to help prevent fires. Let engine cool before
storing and do not store near flames. Clean up oil or
fuel spillage.
•
Let engine cool before storing and do not store near
flame.
•
Do not store fuel near flames or drain indoors.
•
Park machine on level ground. Never allow untrained
personnel to service machine.
•
Use jack stands to support components when required.
•
Carefully release pressure from components with stored
energy.
•
Disconnect battery before making any repairs. Disconnect
the negative terminal first and the positive last. Connect
positive first and negative last.
•
Use care when checking blades. Wrap the blades or
wear gloves, and use caution when servicing them. Only
replace blades. Never straighten or weld them.
•
Keep hands and feet away from moving parts. If possible,
do not make adjustments with the engine running.
•
Charge batteries in an open well ventilated area, away
from spark and flames. Unplug charger before connecting
or disconnecting from battery. Wear protective clothing
and use insulated tools.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.

Toro Mower Safety

The following list contains safety information specific to Toro
products or other safety information that you must know that
is not included in the CEN standard.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
Use of this product for purposes other than its intended use
could prove dangerous to user and bystanders.
4