Table of Contents
Advertisement
Lubrication
Greasing the Machine
Grease the machine more often in dirty or dusty
conditions.
Grease Type: No. 2 lithium or molybdenum grease
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Clean the grease fittings with a rag.
Note:
Scrape any paint off the front of the
fitting(s).
4.
Connect a grease gun to the fitting.
5.
Pump grease into the fittings until grease begins
to ooze out of the bearings.
6.
Wipe up any excess grease.
Lubricating the Mower
Deck-Lift Pivots
Service Interval: Every 100 hours
Use light oil or spray lubricant to lubricate the deck-lift
pivots.
Figure 46
Machine with Side Discharge Shown
Greasing the Mower Deck
Service Interval: Yearly—Grease the pump-belt-idler
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Grease the mower deck idler-pulley pivot until
grease comes out the bottom
Figure
49).
Machine with Side Discharge Shown
g017028
42
Figure 47
arm.
(Figure 48
Figure 48
g017050
or
g295792
Advertisement
Table of Contents
