Toro 03410TE Operator's Manual page 5

6. Replace worn or damaged parts for safety.
7. If the fuel tank has to be drained, this should be
done outdoors.
8. Be careful during adjustment of the machine to pre-
vent entrapment of the fingers between moving
blades and fixed parts of the machine.
9. On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
10. When the machine is to be parked, stored or left
unattended, lower the cutting means unless a posi-
tive mechanical lock is used.
Sound & Vibration Levels
Sound Levels
This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 90 dB(A), based
on measurements of identical machines per SAE
J1174—Mar 85 procedures.
This unit has a sound power level of 105 dB(A)/1pW,
based on measurements of identical machines per proce-
dures outlined in Directive 79/113/EEC and amend-
ments
Vibration Levels
This unit has a vibration level of 7.5 m/s
or, based on measurements of identical machines per
ISO 2631 procedures.
This unit does not exceed a vibration level of 0.9 m/s
the posterior based on measurements of identical
machines per ISO 2631 procedures.
Safety
2 at the posteri-
at
2
5