Table of Contents
Advertisement
CAUTION
Before servicing or making adjustments to the
machine, stop the engine and remove the key
from the switch.
Hood Removal
The hood may be easily removed to ease
maintenance procedures in the engine area of the
machine.
1. Unlatch and raise the hood.
2. Remove the cotter pin securing the hood pivot
to the mounting brackets.
1
Figure 30
1. Cotter pin
3. Slide the hood to right side, lift the other side
and pull it out of the brackets.
4. Reverse the procedure to install the hood.
General Air Cleaner
Maintenance
1. Check the air cleaner body for damage that
could possibly cause an air leak. Replace a
damaged air cleaner body.
2. Service the air cleaner filter every 200 hours
(more frequently in extreme dusty or dirty
conditions).
3. Be sure cover is sealing around the air cleaner
body.
Maintenance
Servicing The Air Cleaner
1. Release the latches securing the air cleaner
cover to the air cleaner body. Separate cover
from body Clean inside of the air cleaner cover.
2
1. Air cleaner dust cup
2. Air cleaner latch
2. Gently slide the filter out of the air cleaner
body to reduce the amount of dust dislodged.
Avoid knocking the filter against the air cleaner
body.
1
1. Filter element
3. Inspect the filter and discard it if it is damaged.
Do not wash or reuse a damaged filter.
Washing Method
A. Prepare a solution of filter cleaner and
water and soak the filter element about 15
minutes. Refer to directions on the filter
– 24 –
1
Figure 31
Figure 32
Advertisement
Table of Contents
