Toro 30821 Operator's Manual page 16

7
8
10
11
Figure 14
1. Throttle
2. Hour meter
3. Temperature light
4. Oil pressure light
5. Glow plug Indicator light
6. Alternator light
7. Cutting unit drive switch
8. Cutting unit shift lever
9. Ignition switch
10. Parking brake
11. Lift lever lock
Hour Meter (Fig. 14)—Indicates the total hours of
machine operation. The hour meter starts to
function whenever the key switch is ON.
Engine Coolant Temperature Warning Light
(Fig. 14)—The light glows if engine coolant
temperature is high. If the traction unit is not
stopped and coolant temperature rises higher, the
engine will die.
Oil Pressure Warning Light (Fig. 14)—The light
glows if engine oil pressure drops below a safe
level.
Alternator Light (Fig. 14)—The amp light should
be off when the engine is running. If it is on, the
charging system should be checked and repaired as
necessary.
Glow Plug Indicator (Fig. 14)– An Indicator light
that glows when the glow plugs are operating.
Parking Brake (Fig. 14)—Whenever the engine is
shut off, the parking brake must be engaged to
prevent accidental movement of the machine. To
engage the parking brake, pull up on the lever. The
engine will stop if the traction pedal is depressed
with the parking brake engaged.
Lift Lever Lock (Fig. 14)—Move the lever
Controls
3
4
2
6
5
9
1
– 16 –
rearward to prevent the cutting units from dropping.
Fuel Gauge (Fig. 15)—Registers the amount of
fuel in the tank.
Seat Adjustments (Fig. 15)—Fore and Aft
Adjustment—Move the lever on the side of the seat
outward, slide the seat to the desired position and
release the lever to lock the seat into position.
Deluxe Seat Adjustments Weight Adjustment—
Push the lever up or down to adjust to operator's
weight. Lever up—light operator, lever in middle
position—medium weight operator or lever down
for heavy operator. Inclining Backrest —Turn
handle to adjust angle of backrest.
2
Figure 15
1. Fore and aft lever
2. Fuel gauge
1