Table of Contents
Advertisement
ISO VG 46/68 multi-viscosity, anti-wear
hydraulic fluid
Mobil
Amoco
Castro[
Conoco
Gulf
Kendall
Hyken Golden MV SAE 5W-20
Pennzbell
Phillips
Shell
Sunoco
Texaco
Universal Tractor Hydraulic Fluid
Mobil
Amoco
Chevron
Conoco
Esso
Gulf
Kendall
Marathon
Pennzoil
Phillips
Shell
76 Lubricants
Sunoco
Texaco
Group 2 Hydraulic Fluid (Hot Climate-
Heavy Duty)
Note: The fluids within this group are inter-
changeable.
ISO VG 68 anti-wear hydraulic fluid
Mobil
Amoco
Castrol
Chevron
Conoco
Exxon
Gulf
Kendall
Marathon
Pre-Operation Checks
DTE 15M
Rykon Premium ISO 46
AWH 46
Hydroclear AW MV46
Harmony HVI 46 AW
AWX MV46
Magnus A KV 5W-20
Tellus T 46
Sun Hyd. Oil 2105
Rando HDZ 46
Mobilfluid 424
1000 Fluid
Tractor Hydraulic Fluid
Hydroclear Powertran
Hydraul
Universal Tractor Fluid
Hyken 052
Marafluid Super HT
Hydra-trans
HG Fluid
Donax TD
Hydraulic/Tractor Fluid
TH Fluid
TDH
DTE 26
Rykon AW No. 68
AWS 68
Hydraulic Oil AW ISO 68
Hydroclear AW 68
Nuto H 68
Harmony 68AW
Four Seasons AW 68
IS068
Pennzbell
Phillips
Shell
76 Lubricants
Sunoco
Texaco
IMPORTANT: Group 1 fluids are recommended
for use at typical ambient temperatures of 32° F
(O°C) to 105° F (41 °C). The ISO Type 46/48
fluid has been found to offer optimal
performance in a wide range of temperature
conditions for the average user. The Universal
Tractor Fluids offer similar performance for
those who prefer them, with perhaps some slight
loss of efficiency at high ambient temperatures
compared to the Type 46/48 fluids.
Group 2 fluids are recommended for heavy-duty
use in hot climates where ambient temperatures
range from about 70°F (20°C) to 120°F (49°C). Use
at lower ambient temperatures may result in hard
starting, increased engine laboring while cold,
sluggish or non-operating spool valves while cold
and high filter back-pressure due to the higher
viscosity of these fluids.
Note: When changing from one type of hydraulic
fluid to another, be certain to remove all the old
fluid from the system, as some fluids are
incompatible with others.
Group 3 Hydraulic Fluid
(Biodegradable)
ISO VG 32/46 anti-wear hydraulic fluid
Mobil
Note: This biodegradable hydraulic fluid is not
compatible with the fluids in Group 1 and 2.
Note: When changing from standard fluid to the
biodegradable type, be certain to follow approved
flushing procedures as published by Mobil.
Contact your local Toro Distributor for details.
IMPORTANT: Use only the types of hydraulic
fluids specified. Other fluids could cause system
damage.
– 13 –
AW Hydraulic Oil 68
Magnus A ISO 68
Tellus 68
AW 68
SunVis 868
Rando HD 68
EAL 224H
Advertisement
Table of Contents
