Table of Contents
Advertisement
Installation Adjustments
Adjustment Mode
Installation
It will be necessary to perform several mechanical adjustments while
in the installation mode. Remove the top cover in order to gain access
to the adjustment points (see Access to controls).
Two possible ways to enter the installation mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General access menu.
To enter the adjustment mode :
1. Push the cursor key é or ê to highlight enter ADJUST
2. Press ENTER. The path selection menu will be displayed.
7-2
Scheimpflug Adjustment
Optical Lens Focusing
Raster Centering
CRT Projection Angle Adjustment
$'-867
67$1'%<
GENERAL ACCESS
5
6
3
4
1
2
Enter ADJUST
Select with
,
or
then <ENTER>.
<EXIT> to return
5976026A BARCOVISION 708 200499
(;,7
(17(5
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Advertisement
Table of Contents
