Pioneer DVR-630H-S Operating Instructions Manual page 65

-530H_EU.book 67 ページ ２００５年２月１４日 月曜日 午後２時２０分
book 65 ページ ２００５年２月１４日 月曜日 午後２時２０分
Switching DVD soundtracks
DVD-Video
When playing a DVD disc recorded with two or more
soundtracks (often in different languages), you can
ージ ２００５年２月１４日 月曜日 午後２時２０分
To resume normal playback, select 'Repeat Off'
switch the soundtrack during playback.
rom the Repeat Play menu.
• You can also press CLEAR to cancel repeat play if no
Check the disc packaging for details of the soundtrack
menu OSD (such as the Play Mode menu) is
options.
displayed.
５年２月１４日 月曜日 午後２時２０分
rogram play
dvance/frame reverse
DVD-Video HDD CD
HDD Video CD Super VCD
his feature lets you program the play order of titles/
ance or back up video on a DVD disc or the
1
hapters /folders/tracks on a disc or the HDD.
by-frame. With Video CD/Super VCDs, you
• Press AUDIO repeatedly to select an audio
by date (most recent first),
1
Select 'Program' from the Play Mode menu.
e frame advance.
soundtrack.
le name or recording date (oldest
Select 'Input/Edit Program' from the list of
rogram options.
10Titles
Play Mode
23:00 FRI 3/12
11/29 MON 7:00PM PLAY
23:00 Fri 3/12 Pr 4 SP
11/29Mon 7:00PM 2ch SP
Search Mode Input/Edit Program
2h00m(1.0G) 2h00m(1.0G)
A-B Repeat
Start Program Play
PAUSE
Repeat
20:00 FRI 3/12 Cancel Program Play
20:00 Fri 3/12 Pr 9 SP Program
Erase Program List
2h00m(1.0G)
STEP/SLOW
22:00 THU 2/12
22:00 Thu 2/12 Pr 7 SP
• The sound may drop out for a few seconds when
1h00m(1.0G)
switching soundtracks.
19:00 MON 29/11
19:00 Mon 29/11 Pr 2 SP
he Program edit screen that appears depends on the
• Some discs feature both Dolby Digital and DTS
1h00m(1.0G)
playback, press PAUSE.
ind of disc loaded.
soundtracks. There is no analog audio output when
this chapter make use
On the left side is the program list, then to the right is a l genres or just a selected genre DTS is selected. To listen to the DTS soundtrack,
or to back up or advance one frame.
ese using the
connect this recorder to a DTS decoder or AV amp/
st of titles (DVD, HDD), folders (WMA/MP3), or tracks
wn or for continuous frame reverse/
el from any screen, use
CD, Video CD/Super VCDs). On the far right is a list of receiver with built-in DTS decoder via the digital
dvance.
10Titles
also that the button
output. See Connecting to an AV amplifier/receiver on
hapters (DVD, HDD) or tracks (WMA/MP3).
23:00 FRI 3/12
11/29 MON 7:00PM
me normal playback, press
n shows which buttons
page 19 for connection details.
23:00 Fri 3/12 Pr 4 SP
11/29Mon 7:00PM 2ch SP
Select a title, chapter, folder or track for the
2h00m(1.0G) 2h00m(1.0G)
20:00 FRI 3/12
urrent step in the program list.
20:00 Fri 3/12 Pr 9 SP
his chapter apply to the
DVD or HDD: You can add a whole title, or a chapter
2h00m(1.0G)
er VCDs, WMA/MP3
y Mode menu
22:00 THU 2/12
within a title to the program list.
22:00 Thu 2/12 Pr 7 SP
t operation of some
1h00m(1.0G)
• To add a title, select the title.
c loaded. The following
19:00 MON 29/11
19:00 Mon 29/11 Pr 2 SP
ickly identify which
• To add a chapter, first highlight the title, then press
1h00m(1.0G)
de menu gives you access to search
ind of disc.
and select a chapter from the list.
epeat and program play functions.
tons to select an option, then
DVD-R or DVD-RW
Program
Step Title (01-03)
updated according to the new
portant
01.001 Title 01
uced DVD or finalized
02. Title 02
't use the Play Mode features with Video CD/
R/RW
03. Title 03
04.
CDs playing in PBC mode, or while a DVD
n to the title list.
05.
R/RW (unfinalized)
nu is being displayed. For other restrictions,
06.
07.
following sections.
08.
W
Note
DD DVD
1.• Some discs only allow you to change audio language from the disc menu. Press TOP MENU to access.
• To set audio language preferences, see Audio Language on page 103.
2.Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 105).
3.When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
switch the audio channel. Set Dolby Digital Out to Dolby Digital
if you need to switch the audio channel.
ATOR
Downloaded From Disc-Player.com Pioneer Manuals
Note
When playing a program list of DVD-Video chapters, chapters not included in the program list may be sometimes be played, depending on
1
AUDIO
Video CD Super VCD WMA/MP3
Using the Disc Navigator with playback-only
discs
DVD-Video CD
1 Press HOME MENU and select 'Disc Navigator'
Audio : 1/2 Dolby Digital 2/0CH
from the on-screen display.
Alternatively, for a CD, Video CD, Super VCD or WMA/
MP3 disc, you can press DISC NAVIGATOR , which takes
you straight to the Disc Navigator screen.
1 Press PLAY MODE to display the Play Mode menu
Navigating discs and the HDD
Disc Navigator
screen.
GUIDE Plus+
ALL
Easy Timer
During playback you can easily jump to another title,
Play Mode
chapter or track on a disc using the number buttons on
Photo Viewer
PLAY.
the remote.
2 Select what you want to play.
Use the
select.
• You can also access the Play Mode menu from the
Home Menu (press HOME MENU ).
Depending on the type of disc you have loaded, the Disc
Navigator looks slightly different.
2 Use the
• When a DVD is loaded, titles are shown on the left,
• To exit the Play Mode menu, press HOME MENU or
chapters on the right. Select a title, or a chapter
PLAY MODE .
within a title.
Chapter(001-015)
Chapter 001
• When a CD or Video CD/Super VCD
Search Mode
Chapter 002
of the tracks is displayed.
Chapter 003
ALL
Chapter 004
• When a WMA/MP3 disc is loaded, a list of folders and
Chapter 005
Chapter 006 The Search Mode feature lets you start playback from a
tracks is displayed (as shown below). Select a folder
Chapter 007
or a track within a folder.
specified point in a disc by time
Chapter 008
folder/track number.
Disc Navigator
1 Select 'Search Mode' from the Play Mode menu.
DVD-Video Video mode
CD
WMA/MP3
2 Select one of the search options.
1 During playback use the number buttons to
enter a chapter number within the current title.
For example, for chapter 6, press 6 ; for chapter 24,
press 2 , then 4 .
• To clear and start again, press CLEAR .
Playback starts after you press ENTER .
2 Optionally: Press ENTER.
Switching audio channels
VR mode
WMA/MP3
CD or Video CD /Super VCD : Select a track to add to the
2
For HDD and VR mode content recorded with bilingual
program list.
audio, you can switch between left (L) channel, right (R)
channel, or both (L+R).
Program
Step Track (01-10)
When playing Video CDs and audio CDs you can switch
01.04 Track 01
between stereo, just the left channel or just the right
02. Track 02
03. Track 03
channel.
04. Track 04
05. Track 05
Some Super VCDs have two soundtracks. With these
06. Track 06
discs you can switch between the two soundtracks as
07. Track 07
08. Track 08
well as individual channels in each.
WMA/MP3: You can add a whole folder, or a track within
CLEAR
CLEAR
a folder to the program list.
• To add a folder, select the folder.
Video CD Super VCD WMA/MP3
• To add a track, first highlight the folder, then press
and select a track from the list.
ENTER
1 To display/switch the audio channel, press
Program
Step AUDIO repeatedly. Folder (01-03)
01.01 01.Rock
The audio channel(s) currently playing are indicated on-
02. 02.Pop
03. PLAY 03.Dance
screen.
04.
05.
06.
VR mode
07.
08.
• L+R – Both channels (default)
Disc Setup
Initial Setup
• L – Left channel only
After pressing ENTER to add the title/chapter/folder/
Video/Audio Adjust
Play Mode
track, the step number automatically moves down one. • R – Right channel only
Time Search
Search Mode
Copy
• To insert a step into the program list, highlight the
A-B Repeat Title Search
Repeat Jukebox
Chapter Search
step number where you want to insert another step,
CD
Program
then select a chapter/title/folder/track as usual. After
• Stereo – Stereo (default)
pressing ENTER , all the subsequent steps move
• 1/L – Left channel only
down one.
to highlight items and ENTER to
• 2/R – Right channel only
• To delete a step from the program list, highlight the
step you want to delete, then press CLEAR .
Super VCD
4 Repeat step 3 to build up a program list.
and ENTER to navigate.
A program list can contain up to 24 titles/chapters/
• 1 Stereo – Soundtrack 1 / Stereo (default)
folders/tracks.
• 1 L – Soundtrack 1 / Left channel
5 To play the program list, press
• 1 R – Soundtrack 1 / Right channel
1
is loaded, a list
Program play remains active until you turn off program
• 2 Stereo – Soundtrack 2 / Stereo
play (see below), erase the program list (see below), eject
ENTER
• 2 L – Soundtrack 2 / Left channel
the disc or switch off the recorder.
• 2 R – Soundtrack 2 / Right channel
• You can use repeat play with program play. Start
2
playback of the program list then select Program
Repeat from the Repeat Play Mode menu (see
Repeat play on page 66).
Folder (01-03) Track(001-004)
01.Rock 001.Intro
02.Pop 002.Escape
03.Dance 003.Everything You Say
PCM (see Dolby Digital Out on page 103) or listen via the analog outputs
004.What I Do
HDD CD Video CD
3
Total Time 0.00.00
07
PLAY MODE
AUDIO
Track(001-004)
001.Intro
002.Escape
003.Everything You Say
004.What I Do
HDD
Video CD WMA/MP3
PLAY.
or by title/chapter/
Super VCD
En