Pioneer DVR-630H-S Operating Instructions Manual page 35

-530H_EU.book 35 ページ ２００５年２月１４日 月曜日 午後２時２０分
book 33 ページ ２００５年２月１４日 月曜日 午後２時２０分
4 Total running time of title
5 Angle indicator
Lights during multi-angle scenes.
Play display 2
ージ ２００５年２月１４日 月曜日 午後２時２０分
1
Using the Home Menu
rom the Home Menu screen you can access all the
Play
eatures of the recorder.
DVD-R Video
Note that some options in the Home Menu may be
５年２月１４日 月曜日 午後２時２０分
VD discs
rayed out sometimes, indicating that they are not
Hi-Speed Copy
Title Name
vailable at the present time. For example, the
low shows the basic playback controls for
hotoviewer option is grayed out unless there is a disc
and recordable DVD discs.
oaded that contains JPEG image files.
1 Chase playback, simultaneous record/playback,
Press to start playback.
copy, disc back-up
ress HOME MENU to display the Home Menu screen:
If RESUME is displayed on-screen, play-
Indicates that recording, copying or back-up is in
日 月曜日 午後２時２０分
nnected to your TV using a SCART
back starts from the place last stopped.
progress.
supports Direct Recording, it's
Press to stop playback.
2 Elapsed chapter time
start recording whatever channel
TOP
You can resume playback from the same
. See Direct recording from TV on
Disc Navigator
3 Total running time of chapter
PLAY . (Press
point by pressing
d instructions.
GUIDE Plus+
again to cancel the resume function.)
4 Data transfer rate
Easy Timer
art recording.
roubleshooting on
Shows the current data rate being read from the disc.
Pauses playback, or restarts playback
ording will be in SP (standard play)
Play Mode
USE
when paused.
ive you around two hours of
Photo Viewer
5 Copy protected material (!)
or your country.
lank DVD disc. The different
Shows '!' if the playback material is copy-once protected.
Press to start scanning. Press repeatedly
ble in GUIDE Plus+ is
SCAN
nd their recommended uses are
Use the buttons followed by ENTER to select
to increase the scanning speed.
selected broadcasters
etail in the chapter on Recording.
Recording display
he option you want. To exit the Home Menu, press
ant that the host
e field to • Manual channel setting – This setting lets you skip
ording by pressing PAUSE .
HOME MENU .
Press to skip to previous/next chapter/title.
tly identified in order to
NEXT
channels where there is no station, as well as
PAUSE again to restart recording.
(During playback you can also use the
download).
manually tune to stations. See Manual CH Setting on
at anytime in
front panel +/– buttons.)
o stop recording, press
page 101.
receiver, this recorder
N .
Rec
els for the host channel:
Except VR mode: During playback, enter a
• Setting up the remote to control your TV – You can set
DVD-R Video
9)' or
chapter number then press ENTER to skip
up the supplied remote control to control many
overnight (do not leave
recording directly to that chapter within the currently
brands of TV. See Setting up the remote to control your
HOME
MENU
playing title.
TV on page 109.
st recorded should be on the HDD
eiver, you need to
EAR
On some discs, you can also use the num-
EAR
e title with one or more chapters.
e table below:
• If for any reason you need to cancel the setup process
ber buttons to select numbered items in
5
before it's completed, you will be asked the next time
tart playback.
the disc menu.
TER
omments
you switch on whether you want to start setting up
yback before the end of the
VR mode only: During playback, enter a
1 Current title number
again, or whether to leave it until later.
OP .
title number then press ENTER .
2 Elapsed recording time
All: Press CLEAR to clear a number entry
Home menu options
and start again.
3 Timer recording start and stop times
Disc Navigator (page 62,
Shows the start and stop times if the current recording is
Setting up the GUIDE Plus+™ system
-in TV tuner
ENTER . page 81) (Commercial back/skip) Each press skips
KIP
a timer recording.
nalog only
backward/forward progressively up to a
The GUIDE Plus+™ system is a free, interactive on-
ve scan GUIDE Plus+ (page 38)
maximum of ten minutes forward or three
screen television programming guide. The system offers
4 Remaining recording time available
nels
minutes back.
Easy Timer (page 54) program listings for all major channels, one-touch
Shows the amount of space left on the disc in the current
nt ways to select TV channels. Note
nalog only
recording, search by genre, recommendations according
recording mode.
During playback, press to start slow-
W the TV channel during playback,
to your profile and more.
se TMF if you live in
motion playback. Press repeatedly to
Play Mode (page 65) 5 Recording mode
cording standby.
msterdam, Eindhoven or
For the GUIDE Plus+ system to function correctly, it is
change the playback speed.
Shows the current recording mode (XP, SP, LP, etc.), and
otterdam.
Photo Viewer (page 93)
important that you set the language and country
While paused, press to advance a single
the total recording time of the disc.
correctly in the Setup Navigator, and that you have
nalog only frame in either direction.
performed a scan for available channels, as these are all
Press to display the menu of a DVD-Video
used by the GUIDE Plus+ system. If any of these things
CH
disc. Note
MENU
are not yet set, please run the Setup Navigator first (see
V is analog only. Use
1.Data transfer rate shows the amount of video and audio information recorded on the disc. It is not an indication of picture/audio quality.
urosport if you are a SKY
Switching on and setting up on page 25).
, Not
Use the cursor buttons to navigate DVD-
bscriber and you no longer
NTER .
TV listings information is received via 'host channels'. In
Video disc menus; press ENTER to select
ve a terrestrial antenna.
order to receive the correct TV listings information for
items.
output
Downloaded From Disc-Player.com Pioneer Manuals
your country or region you need to set up the GUIDE
d the the appropriate host
Plus+ system and 'download' the TV listings information.
r on and the recorder in
ENTER
2 3 4
3–2 0. 00. 15
Chapter Time 0. 00. 21
Chapter Total 0. 01. 52
4.32Mbps
Playing from the HDD
: 21/11 Football match
The table below shows the basic playback controls when
playing video recorded on the hard disk (HDD).
Changing audio channels
You can change the audio channel of the broadcast or
external input signal.
Disc Setup
STOP
Initial Setup
Video/Audio Adjust
• If you cannot receive any of the host channels (see
Copy
the above table) then you won't be able to use the
Jukebox
GUIDE Plus+ system. In this case do not set the
postal code (or set Country to Other ) in the GUIDE
• Press AUDIO to change the audio.
Plus+ setup screen. (When GUIDE Plus+ service
The current audio channel is displayed on-screen.
starts in your area, set the postal code again.)
• If the NICAM audio setting (see Nicam Select on
• Even if you can't use the EPG functions where you
page 102) is set to NICAM and you are watching a
1 2 live, you can still set ShowView timer recordings and 3 4
NICAM broadcast, you can switch between NICAM
manual recordings — see Setting a timer recording on
and Regular (non-NICAM) audio.
page 53.
3 0. 00. 15
21:00 – 22:00
• The front panel display shows EPG when receiving
XP (1h00m/DVD) Rem. 0h35m
data. If you power on the recorder during an EPG
ENTER
download, the download is canceled.
• If the NICAM broadcast is bilingual, you can also
• EPG data may be received several times a day. All
select the language.
updates are automatic.
• When downloading EPG data, the recorder may
sound as though it is on. This is normal.
Checking the downloaded data the
• You can also select the language for a non-NICAM
Disc Setup (page 95)
following day
bilingual broadcast.
1 Press GUIDE.
Initial Setup (page 100)
Video/Audio Adjust
(page 97)
• When watching a recording made from an external
input with Bilingual recording selected (see External
Copy (page 71)
Audio on page 102), you can switch the audio
Jukebox (page 90) channel between left ( L ), right ( R ) or both ( L+R ).
Note
• When recording to the HDD with HDD Recording
Format set to Video Mode On, to DVD in Video mode,
You should see a grid filled with channel logos and TV
or on the LPCM setting, only one channel of a
Tip
• When using the simultaneous play and record
feature, the display shows information for playback
only.
• During real-time copy, the copy source playback
information is displayed.
Displaying disc information on- 5
• The Video mode disc displays become the same as a
screen
DVD-Video disc once the disc is finalized.
!
You can display various on-screen information about the
• The total recording time figure shown in parenthesis
disc loaded or the HDD.
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
• Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
Press to start playback.
PLAY
broadcasts versus DVD.
If RESUME is displayed on-screen, play-
back starts from the place last stopped.
• The frame number is shown next to the elapsed time
Playback automatically stops after the end display when the disc is paused.
of a title is reached.
• Copy Once or Can't Record messages may appear
in the stop or recording displays. These indicate that
Press to stop playback.
STOP
the broadcast TV program contains copy control
You can resume playback from the same
AUDIO
information.
point by pressing
1
again to cancel the resume function.)
Pauses playback, or restarts playback
PAUSE
when paused.
Press to start scanning. Press repeatedly
REV SCAN FWD SCAN
to increase the scanning speed.
Press to skip to previous/next chapter/title.
PREV NEXT
(During playback you can also use the
ABC Pr 1
Stereo
front panel +/– buttons.)
1 Press DISPLAY repeatedly to display/change the
NICAM
Copy Once
on-screen information.
Regular During playback, enter a title number then
• Press once to show the HDD and removable disc
press ENTER to skip directly to that title.
DVD Mode
(DVD, etc.) activity together. Press again to show the
Press CLEAR to clear a number entry and
status of just the currently selected playback/
start again.
recording device (HDD or removable disc).
CLEAR
CLEAR
NICAM A NICAM B
• The on-screen display automatically disappears after
150 minutes.
ENTER
Regular NICAM A+B
2 To hide the information display, press DISPLAY
(Commercial back/skip) Each press skips
CM repeatedly until it disappears.
BACK SKIP
backward/forward progressively up to a
The example displays below are a guide only; actual
maximum of ten minutes forward or three
displays vary according to the disc loaded, etc.
A (L) B (R)
minutes back.
A + B (L+R)
HDD and removable disc activity display
During playback, press to start slow-
STEP/SLOW
Press DISPLAY once to see the HDD and removable disc
motion playback. Press repeatedly to
(DVD, etc.) activity. Use the HDD and DVD buttons to change the playback speed.
switch between the two kinds of display. While paused, press to advance a single
frame in either direction.
L R
L+R
HDD DVD
04
PLAY . (Press STOP
DISPLAY
En