Pioneer DVR-630H-S Operating Instructions Manual page 57

-530H_EU.book 55 ページ ２００５年２月１４日 月曜日 午後２時２０分
book 51 ページ ２００５年２月１４日 月曜日 午後２時２０分
Recording from an external
component
VR mode Video mode
ージ ２００５年２月１４日 月曜日 午後２時２０分
Use the / to move the cursor to the
You can record from an external component, such as a
ecording end time on the grid.
camcorder or VCR, connected to one of the recorder's
external inputs.
Recording start time
Easy Timer
the picture quality/recording
11:00
12:00 13:00
1/01
2/01
3/01
1/01
eo mode HDD
SAT
ing a recording, you will usually want to set
CHANNEL + / –
Pr 7
REC MODE
quality/recording time. There are six standard
ng
ilable, which allow you to choose a balance
s you move the cursor around the grid, an arrow
ture quality and recording time.
tretches from the start time to the current cursor
osition, representing the length of the recording. A
ual Recording is set to On (see Manual
ecording of up to six hours can be set.
n page 104), a further option will be available
PCM or XP+ , depending on what you set).
Press ENTER to set the end time.
ording
cording time and picture quality on page 50 for
rd on both DVD-R and DVD-RW
Select 'Yes' to set the timer recording and exit, or
mation.
ence between the two is that
No' to go back to the timer recording screen.
be recorded once, while DVD-RW
• You can check the timer recording details you just set
ed and re-recorded many times.
from the Schedule Area in GUIDE Plus+; see The
Schedule Area on page 43).
be initialized for Video mode or VR
REC MODE
has its advantages, and it depends
o with the recording which mode
xtending a timer recording in progress
ou can extend a timer recording beyond the
recordings in any significant way,
rogrammed end time in two different ways. This can be
r possibilities for cutting, copying,
seful if a broadcast program overruns, for example.
1 Make sure that the component you want to
the video is presented.
record from is connected properly to the DVD
ible when it comes to editing, but
DVD RECORDER
recorder.
at it is compatible with standard
See Chapter 2 (Connecting up) for connection options.
which won't play VR mode discs
EC MODE repeatedly to select a recording
2 Press INPUT SELECT repeatedly to select one of
ed for a particular mode, all
the external inputs to record from.
HOME
gh quality MENU
will be in that mode.
There are three analog inputs and a DV digital input. The
ndard play
current input is shown on-screen and in the front panel
display:
ng play
ended play
• AV2/L1 – Input 1
mber of titles and chapters that can
uper Long play
R mode disc is 99 and 999 • L2 – Input 2 (front panel)
Video mode disc the maximum
uper Extended play
• L3 – Input 3
d chapters is 99 and 99. No more
REC STOP REC
1 2
CM / XP+ • DV – DV input (front panel)
– Manual / Linear PCM / XP+
ì
le on a disc that already contains
e only when manual recording is on)
Check that the Audio In settings for External Audio,
mber of chapters/titles.
Bilingual Recording and DV Input are as you want them
s indicated in the front panel display, and
mode discs are not usable in other
Moving the end time by 30-minute blocks
creen together with the recording time for a (see Audio In Settings on page 102).
ewise, unfinalized video mode
dable disc. If a recordable disc is loaded, the
During timer recording, press and hold ì REC for
ng other recorders are not usable
e remaining recording time for that disc is
hree seconds.
Note
(Note that if the On Screen Display setting
he timer indicator disappears from the front panel
esponsibility for recording failure
1.This cannot be selected if AV2/L1 In is set to Decoder (see AV2/L1 In on page 102).
een Display on page 106) is Off then this
isplay.
defective discs, or damage to the
is not displayed.)
Press ì REC repeatedly to extend recording in 30
minute increments.
nd small scratches on a disc can
Downloaded From Disc-Player.com Pioneer Manuals
d/or recording performance.
care of your discs.
HDD
Recording end time
Basic recording from the TV
14:00 15:00 16:00 17:00
HDD DVD
VR mode
INPUT
SELECT
11:45
– 13:45
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
SP HDD/DVD HDD
disc is full or you stop the recording.
About HDD recording
Recording to the internal hard disk drive (HDD) is very
flexible; you have the full choice of recording quality
options, including manual mode, and of course you can
record, erase and re-record as many times as you like.
The capacity of the hard disk drive means that you can
store many hours of video on it, even using the higher
quality recording modes.
REC
REC MODE
ì
Important
• The maximum number of titles/chapters per title that
can be recorded on the HDD is 999 and 99
respectively. No more recording is possible on the
HDD after the maximum number of titles has been
1
).
reached.
ENTER
• The maximum continuous recording time for one title
is 12 hours.
• It is possible to record both PAL and NTSC titles on
the HDD. Before recording, you need to make sure
that the Input Line System setting (page 107)
1
matches the TV line system of the source you're
recording.
TIMER REC
HDD Video mode compatibility
When recording to the HDD you can choose to record in
1
one of two formats. Set the format from the HDD
or a recordable DVD respectively.
Recording Format item in the Initial Setup menu (see
page 105). • If you're recording to DVD, load a recordable disc (if
When set to Video Mode On, high-speed copying from
HDD to Video mode DVD is possible. When recording a
bilingual broadcast, set which channel you want to
2
record from the Initial Setup menu (see Bilingual
to record.
Recording on page 102).
The front panel display shows the channel number:
When HDD Recording Format is set to Video Mode Off,
high-speed copying isn't possible. However, both
• If the aspect ratio is distorted (squashed or
stretched), adjust on the source component or your
TV before recording.
3 Set up the recorder.
• Use REC MODE to set the recording quality. See
Setting the picture quality/recording time on page 51
Canceling and stopping a timer recording in
for detailed information.
progress
• Press HDD to record to the hard disk drive, or DVD to
After a timer recording has started, you can cancel the
record to a DVD.
program (but continue recording), or stop recording
completely if you need to. Press ì REC when you're ready to start
4
recording.
• The recorder will only start recording from the DV IN
jack if there is a valid signal. Recording will also
pause if the signal is interrupted during recording.
Video mode HDD
• If your source is copy-protected using CopyGuard,
you will not be able to record it. See Restrictions on
video recording on page 50 for more details.
During timer recording, press and hold ì REC for
1
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
HDD
2 When you want to stop recording completely,
press STOP REC.
F
Tip
• You can also stop a timer recording immediately by
AUDIO
pressing STOP REC then selecting Yes to confirm.
F
Preventing use of the recorder before a
ENTER
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
PAUSE
recording has finished.
1 If the recorder is on, switch it into standby.
REC STOP REC
REC MODE
2 Press and hold
ì
three seconds to lock the controls.
The front panel display briefly shows LOCK . If any buttons
are pressed on the remote or front panel, LOCK is briefly
displayed again.
• To unlock the recorder, press and hold
the front panel for three seconds until the display
DVD RECORDER
shows UNLOCK .
• To cancel a timer recording when the recorder is
Press HDD or DVD to record to the hard disk drive
locked, first unlock the recorder (see above), then
press and hold ì REC for three seconds.
you load a new blank DVD-RW disc, the recorder
takes a short while to initialize the disc).
Use the CH +/– buttons to select the TV channel
06
REC STOP REC
ì
DVD
CH
STOP on the front panel for
STOP on
En