Component Video - Pioneer DVR-630H-S Operating Instructions Manual

-530H_EU.book 17 ページ ２００５年２月１４日 月曜日 午後２時２０分
book 15 ページ ２００５年２月１４日 月曜日 午後２時２０分
Connecting to an AV amplifier/receiver
To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the digital
optical output.
In addition to a digital connection, we recommend also connecting using the stereo analog connection for
ージ ２００５年２月１４日 月曜日 午後２時２０分
compatibility with all discs and sources.
Connecting an external decoder box (1)
You'll probably also want to connect a video output to your AV amplifier/receiver. Use the ordinary video output (as
shown here), or the S-video output.
you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this
age. See the previous page for how to connect the G-LINK™ cable.
p
Important
Important
• Noise may be output from your speakers if the recorder is not set up to work with your AV amplifier/receiver
ther types of audio/video output
properly (see Audio Out Settings on page 103).
• Do not connect your decoder box directly to this recorder.
use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output
• Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off
ll as an S-video and component video output.
(in standby).
• For timer recording to work properly on this recorder, the VCR/satellite receiver/cable box must also be switched
supplied audio/video cable
on during recording.
for use with
• It is not possible to watch one TV program and record another using this setup.
s
DIO
UT
connected to a TV that features i/o
nk, EasyLink, MegaLogic,
SCART AV
ATA LOGIC or NexTView Link
CONNECTOR
DEO in SCART cable (not supplied), the
PUT
e available:
TV
g
2
4
TV
wnload
ogramming download
AV 2 (INPUT 1/DECODER) AV 1 (RGB) – TV
G-LINK DIGITAL R L R L
CONTROL
OUT
OPTICAL
IN AUDIO VIDEO AUDIO
on S-VIDEO
INPUT 3 OUTPUT
AC IN
AV 2 (INPUT 1/DECODER)
G-LINK CONTROL DIGITAL R
OUT
OPTICAL
IN
ns cannot be used when the front AUDIO
t the VIDEO OUTPUT jack to a video input
PG .
.
ow jack of the supplied audio/video cable for
compatibility information, see also
nnection.
with your TV.
t the AUDIO OUTPUT jacks to the
SCART AV
g
ing audio inputs on your TV.
CONNECTOR
and white jacks of the supplied audio/video
ows you to record the TV program
e audio connection. Make sure you match up
without having to worry about
1 Connect RF antenna cables as shown.
right outputs with their corresponding inputs
s set to the same channel. See
ecoder This enables you to watch and record TV channels.
tereo sound.
V on page 52 for more on this
2 Connect one of the DIGITAL OUT OPTICAL jack on
this recorder to an optical digital input on your AV
amplifier/receiver.
ownload
Antenna/cable TV
This enables you to listen to multichannel surround
wall outlet
to set up the channel presets of
sound.
ly using the channel presets and
n your TV. See Switching on and 3 Connect the analog AUDIO OUTPUT and VIDEO
OUTPUT jacks on this recorder to an analog audio
and Auto Channel Setting on
his feature. and video input on your AV amplifier/receiver.
4 Connect the AV amplifier/receiver's video output
rogramming download
to a video input on your TV.
mming download allows you to
ding directly from the NexTView
ide displayed on your TV.
ame with your TV for more
use this feature. Note that the SP
Downloaded From Disc-Player.com Pioneer Manuals
ed on your TV correspond to the SP
es on this recorder.
Using the S-video or component video
output
AUDIO/VIDEO
IN
1
3
COMPONENT VIDEO OUT
Y P
B
IN OUT
ANTENNA
AC IN
P R
VIDEO
S-VIDEO COMPONENT VIDEO OUT
Y P B
IN
OUT
AV 1 (RGB) – TV ANTENNA
L R L
P
R
VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
INPUT 3 OUTPUT
1
to a similar input on your TV.
3
For an S-video connection, use an S-video cable (not
2
supplied) to connect the S-VIDEO OUTPUT jack to an S-
video input on your TV
SCART AV
For a component video connection, use a component
CONNECTOR
video cable (not supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video input on your TV.
See also Component Video Out on page 101 for how to set
VCR/Satellite receiver
ANTENNA
/Cable box
up the component video output for use with a progressive
IN
scan-compatible TV.
1
2
corresponding audio inputs on your TV.
You can use the supplied audio/video cable, leaving the
yellow video plug disconnected. Make sure you match up
the left and right outputs with their corresponding inputs
for correct stereo sound.
1 Connect the cable from the antenna/cable TV
TV
outlet to the antenna input on your VCR/satellite
receiver/cable box.
VIDEO
AUDIO
2 Use a SCART cable (not supplied) to connect your
OUT
INPUT
decoder to your VCR/satellite receiver/cable box.
See the manual for your decoder box for more detailed
2
instructions. TV
AV amp/
receiver
3 Use a SCART cable to connect your VCR/satellite
receiver/cable box to the AV2(INPUT 1/DECODER)
AV connector on this recorder.
AC IN
AV 2 (INPUT 1/DECODER) AV 1 (RGB) – TV
AV 2 (INPUT 1/DECODER)
R R
G-LINK CONTROL DIGITAL G-LINK L CONTROL DIGITAL R L L
OUT
OUT
OPTICAL
OPTICAL
IN IN VIDEO VIDEO
AUDIO S-VIDEO AUDIO AUDIO VIDEO
INPUT 3 OUTPUT
INPUT 3
4 Use a SCART cable to connect the AV1(RGB)-TV
AV connector to your TV.
Connect the S-video or component video output
Important
• Do not connect this recorder to your TV 'through'
your VCR using A/V cables. Always connect it directly
to your TV.
Connect the AUDIO OUTPUT jacks to the
02
ANTENNA
IN
VIDEO
IN
COMPONENT
VIDEO INPUT
4 1
DIGITAL
IN
S-VIDEO
INPUT
1
2
ANTENNA
OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Y P
B Y P
IN OUT B
IN OUT
ANTENNA
AV 1 (RGB) – TV ANTENNA
R L
P R P
R
S-VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
OUTPUT
ANTENNA
IN (RF IN)
1
Antenna/cable TV
wall outlet
En