Of A Disc - Pioneer DVR-630H-S Operating Instructions Manual

c .fm 6 ページ ２００５年２月１４日 月曜日 午後７時２２分
66 ページ ２００５年２月１４日 月曜日 午後２時５ 分
Setting
AV1 Out
２００５年２月１４日 月曜日 午後７時３３分
New DVD-R discs are ready for Video mode recording
when you load them, but it is also possible to initialize
them for VR mode recording.
The initialize menu here lets you reinitialize a disc, for
If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case either switch off and reconnect
example if you want to change the recording format of
using the supplied video cable, or reset the recorder (see Resetting the recorder on page 109).
the disc. See Initializing a recordable DVD disc
The Component Video Out setting (see page 101) has no effect when AV1 Out is set to RGB.
e the number buttons to enter a title/chapter/
for detailed instructions.
track number or the search time (in hours,
AV2/L1 In
es & seconds).
P M
Finalize settings
T S
S M
- R T S
R
S
CD Super VCD WMA/MP3
P
Finalize
ack, use the number buttons to
mber.
ack 6, press 6; for track 24, press 2,
Finalizing 'fixes' the recordings in place so that the disc
earch (HDD, DVD): For example, for 25 minutes
can be played on a regular DVD player or computer
NTSC on PAL TV
e current title, press 2, 5, 0, 0. For 1 hour and 15
tart again, press CLEAR.
equipped with a suitable DVD-ROM drive.
s and 20 seconds into the title, press 1, 1, 5, 2, 0.
See Playing your recordings on other DVD players
ress ENTER.
earch (Video CD): For example, for 2 minutes and
page 59 for detailed instructions.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with
ust wait a few seconds and playback
onds into the current track, press 2, 3, 0.
your TV. See also About NTSC on PAL TV on page 107 for related information.
e new track.
apter/Folder/Track Search: For example, for track 6,
Undo Finalize
Audio In Settings
. Alternatively, you can use the
Nicam Select
ss ENTER.
isc Navigator to browse
You can undo the finalization on DVD-RW discs recorded
s of a disc.
on this recorder in Video mode. You need to do this if you
Tip
want to record more material or edit material already on
gator to browse the contents of a disc
Tuner Level
can often select what you want to watch on a the disc.
k.
D disc from the disc menu. Press MENU or TOP
You can also undo the finalization of VR mode discs
NU to display the disc menu.
which have been finalized on other DVD recorders. If
Navigator with recordable
e search doesn't work with CDs and Super VCDs. when you load a disc the message This disc cannot be
HDD
External Audio
recorded. Undo the finalization
command to be able to record on the disc using this
HDD
epeat
recorder.
isc Navigator to browse and edit video
CD Video CD HDD
Ds and the HDD, and to view 1 From the Disc Setup menu, select ÔFinalizeÕ, then
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or
B Repeat function allows you to specify two points les. ÔUndo FinalizeÕ from the finalize options.
bilingual. This has priority over the setting you make here.
B) within a track or title that form a loop which is
n page 81 for more on editing
2 Select ÔStartÕ.
Bilingual Recording
1
over and over.
ring playback, select 'A-B Repeat' from the
DVD to select the hard disk drive or
ode menu.
Optimize HDD
th 'A (Loop Start)' highlighted, press ENTER at
MENU and select 'Disc Navigator'
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except
int you want the loop to start.
en display.
in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.
can press DISC NAVIGATOR to go
You'll see a message appear on-screen recommending
P M
c Navigator screen.
you optimize the HDD.
L S
S M
102
- As you record, erase and edit recordings, the HDD file R L E
buttons to browse up and down the
R
O
system gradually becomes fragmented. Periodically, the
P
HDD will need optimizing to 'clean up' all the fragmented
files.
r (HDD)
10Titles
23:00 FRI 3/12
11/29 MON 7:00PM
En
11/29Mon 7:00PM 23:00 Fri 3/12 Pr 4 SP 2ch SP
etting the loop start point, the highlight will
Downloaded From Disc-Player.com Pioneer Manuals 2h00m(1.0G) 2h00m(1.0G)
atically move down to B (Loop End).
Note
20:00 FRI 3/12
20:00 Fri 3/12 Pr 9 SP
1.You cannot finalize a disc or use the Undo Finalize command if the TV line system of the disc is different to the current setting of the recorder.
2h00m(1.0G)
Options
Video •
S-Video
RGB
on page 60
Video •
S-Video
1
I T
RGB
• You can change the thumbnail picture displayed for
a title; see Set Thumbnail on page 84.
Decoder
4 To play the highlighted title, press ENTER.
• You can also select Play from the command menu
options.
On •
Off
Tip
on
• Use the time search feature to find a particular point
on a DVD or within a title on the HDD. See Search
Mode on page 65 for more information.
buttons.
NICAM •
Changing the display style of the Disc
Navigator
Regular Audio
You can choose to display titles in the Disc Navigator in
various different ways, sorted alphabetically, by
Normal •
recording date, by genre, and so on. You can also choose
whether to display four or eight titles on the screen at the
Compression
same time.
1 From the Disc Navigator's title list, press
Stereo •
is displayed, use this
display the view options panel.
Bilingual
The View Options panel
Style
A/L •
4 Titles
Sort order
NEW first
Genre
B/R
All Genres
Remain
30h30m
2 Use the
)
) Order' or 'Genre', then press ENTER to see the
available view options.
• Style – Select four or eight titles per screen view
Style
4 Titles
Sort order
Explanation
Sets the AV1(RGB)-TV SCART output to standard composite video
(compatible with all TVs).
Sets the AV1(RGB)-TV SCART output to S-video. Recommended if you
are using a long SCART cable.
Important
Sets the AV1(RGB)-TV SCART output to RGB. Good quality but check
• Optimizing the HDD can take as long as eight hours.
your TV for compatibility.
During optimization, playback and recording are not
possible.
• Canceling optimization mid-way does not undo the
3 With 'B (Loop End)' highlighted, press ENTER at
optimization already done, so the HDD will be partly
the point you want the loop to end.
Sets the AV2 (INPUT 1/DECODER) SCART input to standard compos-
optimized.
Playback immediately jumps back to the start point and
ite video.
plays the loop round and round.
¥ Select ÔOptimize HDDÕ from the disc Setup menu.
Sets the AV2 (INPUT 1/DECODER) SCART input to S-video.
• When playing a DVD-Video/Video mode DVD, or from
the HDD, the start and end points of the loop must be
Sets the AV2 (INPUT 1/DECODER) SCART input to RGB.
D
in the same title.
I
Use this setting if you connected a decoder to the AV2 (INPUT 1/
F
4 To resume normal playback, select 'Off' from the
DECODER) SCART connector. For scrambled channels, make sure that
O O O
A-B Repeat menu.
the channel Decoder setting is set to On. (See Manual CH Setting
• You can also press CLEAR to cancel A-B Repeat play
page 101.)
if no menu OSD (such as the Play Mode menu) is
NTSC discs will play correctly on PAL-only TVs.
displayed.
¥ Select ÔStartÕ to optimize.
Use if your TV is already NTSC-compatible.
A progress bar indicates how long there is left to go.
Repeat play
AL L
Initialize HDD
There are various repeat play options, depending on the
kind of disc loaded, or if you're using the HDD for
Record the NICAM audio in a NICAM broadcast.
playback. It's also possible to use repeat play together
Record the non-NICAM audio in a NICAM broadcast. (You can still
with program play to repeat the tracks/chapters in the
When your DVD recorder is working without a problem
switch the audio to record using the AUDIO button before recording.)
program list (see Program play on page 67). this option is not visible in the Disc Setup menu.
However, if the HDD file system becomes corrupted for
Standard setting.
1 Select 'Repeat' from the Play Mode menu.
some reason, you initialize the HDD to fix the problem.
Use if the audio level from the built-in tuner is excessive, causing dis-
Note that initializing the HDD will erase all the data on it.
2 Select a repeat play mode.
tortion.
¥ Select ÔInitialize HDDÕ from the disc Setup menu.
P M
Select if the audio from the currently selected external input is stan-
R
S M
dard stereo.
- R R
D
R
R
P
R
Select if each channel carries a separate soundtrack.
I
F
O O I
Disc Navigator (HDD)
1 1
23:00 FRI 3/12
11/29 MON 7:00PM
Record the left (A) channel of a bilingual source when recording to 23:00 Fri 11/29Mon 3/12 7:00PM Pr 4 2ch SP
4 Titles
2h00m(1.0G) 2h00m(1.0G)
VR mode
HDD with HDD Recording Format set to Video Mode ON, to DVD in
2
20:00 FRI 3/12
¥ Select ÔStartÕ to initialize.
Recent First 20:00 Fri 3/12 Pr 9
Video mode or in LPCM mode, from an external source.
• For VR mode DVD discs, select Repeat Disc, Repeat
2h00m(1.0G)
Title or Repeat Chapter (or Repeat Off). 3
22:00 THU 2/12
As above, but for right (B) channel recording.
All Genres
22:00 Thu 2/12 Pr 7
1h00m(1.0G)
7
19:00 MON 29/11
HDD
DVD- V ideo Video mode HDD
19:00 Mon 29/11 Pr 2
SP
1h00m(1.0G)
• For HDD, DVD-Video and Video mode DVD discs,
select Repeat Title or Repeat Chapter (or Repeat
buttons to select 'Style', 'Sort
Off).
CD Video CD Super VCD
• For CDs and Video CD/Super VCDs, select Repeat
Disc Navigator (HDD)
Disc or Repeat Track (or Repeat Off).
1 1
23:00 FRI 3/12
11/29 MON 7:00PM
23:00 Fri 3/12 Pr 4 SP 11/29Mon 7:00PM 2ch
4 Titles
4 Titles
8 Titles 2h00m(1.0G) 2h00m(1.0G)
WMA/MP3
2
20:00 FRI 3/12
Cancel
20:00 Fri 3/12 Pr 9 SP
Recent First
S
S O S
HDD HDD HDD
2
to
D
T
S
I S
O
HDD HDD HDD
10Titles
SP
SP
SP
SP
10Titles
SP