5 Select a heat setting by touching or
sliding the setting selector with your
finger.
The setting will appear in the display of
●
●
the selected cooking zone.
If you don't choose a heat setting
●
●
within 20 seconds, the cooktop will
automatically turn off. Start with step 1
again.
If a display flashes
This means that:
you have not placed a pan on the correct cooking zone or
●
●
the pan you're using is not suitable for induction cooking or
●
●
the pan is too small or not properly centred on the
●
●
cooking zone.
No heating takes place unless there is a suitable pan
●
●
on the cooking zone.
The cooktop will automatically turn off after 10 minutes
●
●
if no suitable pan is placed on it.
USING YOUR INDUCTION COOKTOP
alternately with the heat setting
6 You can modify the heat setting at any
time during cooking.
Touch the display of the cooking zone
●
●
you wish to adjust.
Adjust the heat setting by touching or
●
●
sliding the setting selector with your
finger.
The new heat setting will appear in the
●
●
display of the selected cooking zone.
15